Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 289 / 2620

configure slot
ExtremeWare 7.7 Command Reference Guide 289
configure slot
configure slot <slot> module <module name>
Description
Configures a slot for a particular I/O module in a modular switch.
NOTE
This command is available only on modular switches.
Syntax Description
slot Specifies the slot number.
module name Specifies the type of module for which the slot should be configured. The list of modules you can
enter will vary depending on the type of switch and version of ExtremeWare you are running.
Certain modules are supported only with specific ExtremeWare Technology Releases.
The following are some of the modules you may specify for a BlackDiamond switch:
10giglr—Specifies a 10 Gigabit Ethernet, 1-port, long-range, fiber module.
f32fi—Specifies a Fast Ethernet, 32-port, fiber module, “i” chipset.
f48t—Specifies a Fast Ethernet, 48-port, copper module.
f96t —Specifies a Fast Ethernet, 96-port, copper module.
g8t—Specifies a Gigabit Ethernet, 8-port, copper module.
g8x—Specifies a Gigabit Ethernet, 8-port, copper module.
g12sx—Specifies a Gigabit Ethernet, 12-port, fiber module.
g12tx—Specifies a Gigabit Ethernet, 12-port, copper module.
g16x—Specifies a Gigabit Ethernet, 16-mini-GBIC port, oversubscribed, fiber module
g24t—Specifies a Gigabit Ethernet, 24-port, oversubscribed, copper module.
WDMi—Specifies a Gigabit Ethernet, WAN module.
arm—Specifies an Accounting and Routing Module (ARM).
a3c—Specifies an Asynchronous Transfer Mode (ATM) module.
mpls—Specifies a MultiProtocol Label Switching (MPLS) module.
p3c—Specifies an OC-3 PoS module.
p12c—Specifies an OC-12 PoS module.
The following are some of the modules you can specify for an Alpine switch:
fm8v—Specifies a VDSL module.
fm24t—Specifies a Fast Ethernet, 24-port, copper module.
fm24mf—Specifies a Fast Ethernet, 24-port, multi-mode, fiber module.
fm24sf—Specifies a Fast Ethernet, 24-port, single mode, fiber module.
fm32pi—Specifies a Fast Ethernet, 32-port, copper power-port module.
fm32t—Specifies a Fast Ethernet, 32-port, copper module.
gm4s—Specifies Gigabit Ethernet, 4-port, fiber module.
gm4t—Specifies a Gigabit Ethernet, 4-port, copper module.
gm4x—Specifies a Gigabit Ethernet, 4-port, GBIC module.