Extreme Networks ExtremeWare 7.7, Command Reference Manual

Page: 1234 / 2620

1234 ExtremeWare 7.7 Command Reference Guide
Troubleshooting Commands
configure debug-trace vrrp
configure debug-trace vrrp <debug level> vlan <vlan name>
Description
This command records debug information to the syslog.
NOTE
This command is available only on the “i” series switches.
Syntax Description
Default
The default level is 0.
Usage Guidelines
The
debug level
range is 0 to 5. Higher levels record more verbose messages. Higher levels also
record the messages recorded at lower levels.
Example
The following command sets the reporting level for VRRP to 5:
configure debug-trace vrrp 5
Following is the log output at this level:
<DBUG:SYS > Vlan/Vrid=vlan1/1 Putting virtualMac (00:00:5e:00:01:01) into arpcom
<DBUG:SYS > Vlan/Vrid=vlan1/1 Putting systemMac (00:01:30:04:c8:00) into arpcom
History
This command was first available in ExtremeWare 6.2.1.
Platform Availability
This command is available on ”i” platforms.
debug level Specifies a debug level:
0 — Records critical errors, such as a task crash or an interface down.
1 — Records warning messages.
2 — Records concise packet information.
3 — Records the same information recorded in level 2, with more detail.
4 — Displays a dump of each packet.
5 — No additional information recorded.
vlan name Specifies a VLAN name.