OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
5-5
November 19, 2009
5. Make the modified route active by pressing [EXEC].
Waypoints entered by means of place/bearing-place/bearing will be displayed as place/bearing/distance
waypoints, based on the first reference waypoint.
NOTE
:
The system allows for a maximum of 99 temporary waypoints in a flight plan.
C. ALONG-TRACK
WAYPOINTS
An along-track waypoint lies on the inbound (outbound) course to (from) the reference waypoint at the
selected distance. No course change occurs at the along-track waypoint.
With the reference waypoint identifier in the scratchpad:
1. To enter a new waypoint AFTER the reference waypoint, key in /, and distance, e.g. KILLA/20.
or:
2. To enter a new waypoint BEFORE the reference waypoint, key in /, [+/-], distance, e.g. KILLA/-20.
or:
3. To move an initial DME ARC fix along the arc, key in /, desired radial from the DME station, e.g.
D173J/203.
then:
4. Display the reference waypoint location in the route by pressing [LEGS] and [NEXT] or [PREV] as
required.
5. Move the waypoint to the reference waypoint in the route by pressing the appropriate LSK.
NOTE: All along-track waypoints must be inserted at the reference waypoint location, independently of their
actual relative position relative to that waypoint.
6. Verify the waypoint entry by checking the course and distance of the previous and next legs.
7. Make the modified route active by pressing [EXEC].
NOTE: If the leg created by the along-track waypoint overlaps an adjacent waypoint, such that a course
reversal is created, the along-track waypoint is not accepted and the data entry error message "!OUT
OF RANGE" is displayed.
This page is printed under user's responsibility
and must not be retained for reference
