OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-75
Revision 2 March 01, 2010
•
Ex: To change 04/ABC /111.050 to 04/ABC /112.075 at LSK 2L press the following keys:
a) “//112.075” and LSK 2L or
b) LSK 2L to transfer the current library record into the scratchpad, press the [CLR] key 5 times to erase
the 5 last characters of the frequency, then enter the new frequency by pressing [2],[.],[0],[7],[5] and
press the LSK 2L to enter the modified record into the library.
•
In order to transfer a library record to the active or standby field of the COM LIBRARY page first press the LSK
corresponding to library record. This places the preset number, the identifier and the frequency in the
scratchpad. Then press LSK 1R, LSK 2R, LSK 3R or LSK 4R (as desired) to transfer the contents of the
scratchpad. The identifier will not be displayed on the radio page field even though it was displayed in the
scratchpad.
If COM1 is configured:
ACT1 [2R]:
Display active preset number/modify active preset number and frequency of the COM1 radio.
SBY1 [3R]:
Display standby preset number/modify standby preset number and frequency of the COM1 radio.
If COM2 is configured:
ACT2 [4R]:
Display active preset number/modify active preset number and frequency of the COM2 radio.
SBY2 [5R]:
Display standby preset number/modify standby preset number and frequency of the COM2 radio.
COM RADIO [6L]:
Access to COM RADIO page.
NOTE: "COM" or "VHF" depending on the configuration.
LIBRARY [6R]:
Access to RADIO LIBRARY 2/N page.
NOTE: The LIBRARY [6R] prompt is present while the aircraft is on the ground. After take-off it is removed and
access to the LIBRARY page is then accessible from the specific radio equipment only.
The LIBRARY is automatically locked when the aircraft takeoff.
This page is printed under user's responsibility
and must not be retained for reference
