OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page C-16
November 19, 2009
PROCEDURE TURN
Procedure turns are typically represented by three waypoints arranged in a V-shaped pattern. The naming
convention for these waypoints indicates the turn direction at the end of each leg. Thus, in this example, a left
turn is performed at ANCPTL and a right turn at ANCPTR.
NOTE: The Rockwell Collins 3 EFIS has the capability to display procedure turns using arcs.
OFFSET NAVIGATION
This example shows a typical EFIS display for an aircraft flying a route with a right offset of 20 nm relative to the
original flight plan. Although the offset route itself is not displayed, lateral guidance relative to the offset route is
provided when Rose mode or Arc mode is selected via the EFIS Mode Select Panel. For more information on
offset route navigation, refer to Section 5.
This page is printed under user's responsibility
and must not be retained for reference
