OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-49
November 19, 2009
FIX INFO 1/1
The FIX page provides bearing or course and distance information relative to an entered FIX. Distance To Go
(DTG) and ETA are displayed for radial, distance and abeam intersections. The FIX entry must be a valid
waypoint or navaid. Radial/Distance (RAD/DIS) entries can be radials or distances from the entered FIX. Radial
or distance or abeam intersection data may be entered as waypoints in the route by line selecting into the
scratchpad and transferring to the RTE LEGS 1/X page.
Display FIX INFO 1/1 page by pressing [FIX] or [INIT REF], <FIX INFO>.
FIX [1L]:
FIX identifier. Valid entry is any airport, navaid or waypoint identifier found in the
navigation/custom/temporary waypoints/user waypoints databases, the Bulls Eye waypoints or in the Active
route, except for moving waypoints, which are not allowed. Displays selected fix on EHSI. Entry of seven-
character waypoint is allowed.
RAD/DIS [3L, 4L]:
Radial and/or distance from FIX. If radial line or distance intersects the active route,
distance to go and ETA at the intersection are displayed. Radial entry is displayed on EHSI as a radial line.
Distances are displayed on EHSI as a circle around the fix.
ABEAM [5L]:
Initially, the ABEAM prompt is displayed. Line selecting ABEAM displays radial/distance, distance
to go and ETA at the abeam intersection.
ERASE FIXES [6L]:
Removes all downtrack fixes from display. A downtrack fix can also be deleted by using the
CLR key.
DTG (3L,4L,5L):
Distance to go along the flight plan to the downtrack fix. The field becomes blank after the
downtrack fix was overflown.
ETA (3L,4L,5L):
Estimated Time of Arrival at the downtrack fix. After the downtrack fix was overflown (the DTG
field is blank), this field displays the actual time of arrival at the downtrack fix.
NOTE: On ground, ETEs are displayed instead of ETAs if the PLAN DATA page is configured. If not
configured, the field is blank.
REF [1R]:
FR: Radial (RAD) from FIX to present position. TO: Course (CRS) from present position to FIX. The
default value is the last selected value, which is restored after a power interruption.
RAD/DIS(1L):
Displayed when REF is FR. Radial/Distance from FIX to present position.
1 R
2 R
3 R
4 R
5 R
6 R
FIX INFO 1/1
F I X C R S / D I S R E F
ANN
3 1 0
o
/ 4 5 6
N M
TO
<
- - D O W N T R A C K F I X E S - -
R A D / D I S D T G E T A
175
o
/
80
N M
5 4 7
N M
0 3 0 7 . 2
Z
163
o
/
100
N M
5 2 0
N M
0 2 3 9 . 2
Z
A B E A M
216
o
/ 6 0
N M
5 9 9
N M
0 4 0 0 . 6
Z
<
ERASE FIXES
ANN216.3/60.2
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference