manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 359 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 359

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 

Page 13-31 

November 19, 2009 

 
NOTE: 

The FMS does not accept out of range values. An error message will appear in the scratchpad if 
invalid entries are made by the user. If the COM Frequency Source Selection discrete is set then 
entries made will generate an error message “RADIO TUNING DISABLED” to inform the pilot that he 
may no longer tune this radio from the FMS. 

 

The COM VHF radio equipment name can also be configured as COM1/COM2, COM3/COM4 or 
VHF/VHF1. 

 
 

COMMUNICATION RADIOS (VHF RADIO Page 1/2) 

 

This page allows the pilot to control the operation of the VHF radios by transmitting and receiving digital labels 
capable of controlling up to two VHF units. 

This page allows the pilot to verify and modify the active and standby frequencies for the COM radios. It allows 
the pilot to control the operation of these radios.  
 
Display the first VHF 1/2 page from the horizontal configuration by pressing [RADIO], <VHF#> or [RADIO], 
[NEXT], <VHF#> or [RADIO], [RADIO], <VHF#>. 
 
Display the first VHF 1/2 page from the vertical configuration by pressing [RADIO], [NEXT], <VHF#> or [RADIO], 
<RADIO DETAILS>, <VHF#> or [RADIO], [RADIO], <VHF#>. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

NOTE:  The COM VHF radio equipment name can also be configured as “COM" or "VHF". 

 

The VHF ident suffix "x" (e.g. VHF, VHF1...) and the side (left or right) where the COM units appear is 
depending on the installation configuration. The tables below provide examples.

 

 

VHF1 [1L]:

 Display and modify active/standby preset number and channel of the VHF1 radio. Selecting LSK 1L 

when the scratchpad is empty will toggle the standby and the active preset/frequency. 
 

VHF2 [1R]:

 Same

 

as above, but referencing VHF2 instead of VHF1 and LSK 2R instead of LSK 1L. 

 
NOTE:  It is possible to have "-" in one or both of the active and standby fields after FMS maintenance. Toggling 

is not allowed when "-" are present in the standby field. Then, a frequency needs to be entered in the 
standby field first before the active/standby field toggling is allowed, otherwise a warning message will 
be displayed in the scratchpad.

 

 

SQUELCH [3L]: 

When configured and for VHF-422 and VHF-4000 VHF radios only, toggles COM1 radio 

squelch status ON or OFF.

 

1 R

2 R

3 R

4 R

5 R

6 R

  

                 

 VHF 

       

1/2 

  V H F 1                             V H F 2

 

b

118.400

 

0 4

   

--

 

151.000

b

    1 2 6 . 4 0 0  

0 5

   

- -

  1 2 4 . 6 5 0  

 

  S Q U E L C H                 S Q U E L C H  

>

OFF                 ON

<

 

 

                          V O I C E / D A T A  

                   DATA

<

 

<

RADIO          LIBRARY

>

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments