OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page E-31
November 19, 2009
STATUS
ADVISORY
MESSAGE
DESCRIPTION ACTION
APPLICABLE
CONFIGURA-TION
CHECK TRANS
ALT/LVL
(cont’d)
i) the TRANS ALT field (for the
case that a new ORIGin or
departure procedure(s) was
added to the active flight plan);
or
ii) the TRANS LVL field (for the
case that a new DESTination or
arrival procedure(s) was added
to the active flight plan)
If Tactical Approach is
configured and:
a) The operator has made the
inactive route, containing a
tactical approach in its flight
plan, into the now active route;
and
b) A value for transition altitude
or transition level does not exist
in the tactical approach
database for the selected
tactical approach procedure.
CHECK TRUE/MAG
REF
If the TRUE/MAG cockpit switch
is not installed and the A/C has
transitioned out of the Polar
region
.
If required, change Angle
reference to MAG via FMS
SET-UP page (or alternatively
via external switch).
CHECK UPDATE
The FMS detects that the
position difference between the
sensor to be updated and the
reference position is greater
than the accuracy of the sensor
to be updated. This message is
only available on the UPDATE
POS 1/1 page.
Review the position update.
All configurations
COURSE
CHANGE>125
AHEAD
The FMS detects that the course
change of a fly-by leg transition
(from the active leg to the next
leg) is greater than 125 degrees
and within 2 minutes from the
turn anticipation point (triggered
for non-published procedures
only).
As deemed necessary, modify
flight plan if such a course
change is not desired.
Message configured to
advisory.
DIMMING
INTERNAL MODE
External control source for
display dimming is providing a
signal of less than 0.3 VDC for
more than 2 seconds.
Use internal dimming mode.
External dimming control
source installed.
DIRECT HOLD
ENTRY
The FMS detects holding pattern
entry procedure to be used on
crossing of holding fix.
Acknowledge the holding
pattern entry.
All configurations
This page is printed under user's responsibility
and must not be retained for reference
