OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-186
November 19, 2009
SELECT CO ROUTE 1/X
Display SELECT CO ROUTE 1/1 page by pressing [RTE] and <CO ROUTES>.
When a company route is selected for the inactive route, all the fields are displayed in cyan (as shown in the figure
above right).
ROUTE [1L,2L,3L,4L,1R,2R,3R,4R]:
Custom Route Name. Pressing the corresponding LSK will load the custom
route (DIRECT or INVERSE mode) in the sequence selected in LSK 5L into the modified route and return to the
RTE 1/1 page. If the display of the CO ROUTE is configured to ORIG_DEST, only the particular routes associated
with the entered origin and destination will be displayed. If CO ROUTES is configured to ALL, every CO ROUTE in
the database will be displayed.
NOTE: When airborne, a
custom
route name selected on page SELECT CO ROUTE 1/1 will replace the current
active route without replacing the origin.
LOAD [5L]:
Toggle DIRECT/INVERSE direction of the route to be loaded.
ROUTE [6L]:
Access to the RTE 1/X page.
1 R
2 R
3 R
4 R
5 R
6 R
SELECT CO ROUTE 1/1
1 2 0 1 1 4 0 1
1 2 0 2
L O A D
>
DIRECT
<
ROUTE
1 L
2 L
3 L
4 L
5 L
6 L
1 R
2 R
3 R
4 R
5 R
6 R
SELECT CO ROUTE 1/1
1 2 0 1
1 4 0 1
1 2 0 2
L O A D
>
INVERSE
<
ROUTE
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference