
OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-82
November 19, 2009
REF ID [1L]:
Storage of the reference identifier. If there is a valid position in the scratchpad when the page is
opened, then the FMS will create a temporary waypoint at that position and places the identifier in this field. If
the reference identifier is a moving waypoint, the following prompts are blanked and disabled: CARP> and
TACT APPR>.
RAD/DIS [2L]:
The RAD/DIS combination allows the pilot to position a waypoint relative to the REF ID. The
relative position is used to create a temporary waypoint when a new DES+SAR procedure is selected.
CARP [3R]:
Displayed when CARP is configured. Pressing the line select key:
•
If SAR waypoint is not entered in field REF ID of the DES+SAR page and no CARP procedure exists in the
flight plan then display the LEGS page with CRP01/C in the scratchpad.
•
If SAR waypoint is not entered in the field REF ID of the DES+SAR page and a CARP procedure exists in
the flight plan then display the CARP PLAN 1/3 page.
•
If SAR waypoint is entered in the field REF ID of the DES+SAR page and no CARP procedure exists in the
flight plan then display the LEGS page with the identifier and /C qualifier in the scratchpad allowing entry in
the flight plan.
•
If SAR waypoint is entered in the field REF ID of the DES+SAR page and it is different from the PI of the
existing CARP procedure then display the CARP PLAN 1/3 page with the identifier in the scratchpad.
TACT APPR [4R]:
Displayed when the TACT APPR option on the CONFIG page is configured.
•
If no SAR waypoint is entered in the field REF ID of the DES+SAR page and no previously defined tactical
approach Runway Threshold Waypoint then display default LEGS page with the /A qualifier in the scratchpad
allowing entry in the flight plan.
•
If no SAR waypoint is entered in the field REF ID of the DES+SAR page and previously defined the tactical
approach Runway Threshold Waypoint then display the TACTICAL APPR page.
•
If SAR waypoint is already defined then display the default LEGS page with the identifier with the /A qualifier
in the scratchpad allowing entry in the flight plan.
1 R
2 R
3 R
4 R
5 R
6 R
DES+SAR 4/4
R E F I D
WPT03
R A D / D I S
- - -
T
/ - - - -
N M
CARP
>
TACT APPR
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference