OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-32
November 19, 2009
SQUELCH [3R]:
Same
as above, but referencing COM2 instead of COM1.
VOICE/DATA [5R]:
When voice/data control is configured and for the VHF-422 and VHF-4000 VHF radios only,
allows the crew to place the VHF radio in either the VOICE or DATA mode.
RADIO [6L]:
Access to the RADIO top level page where the VHF radio is located.
LIBRARY [6R]:
Access to the access to the VHF Library page.
COMMUNICATION RADIOS (VHF RADIO Page 2/2)
This page allows the pilot to control the operation of the VHF radios by transmitting and receiving digital labels
capable of controlling up to two VHF units.
NOTE: This page is only displayed if radio test is configured.
Display the second VHF 2/2 page from the horizontal configuration by pressing [RADIO], <VHF#>, [NEXT] or
[RADIO], [NEXT], <VHF#>, [NEXT] or [RADIO], [RADIO], <VHF#>, [NEXT].
Display the second VHF 2/2 page from the vertical configuration by pressing [RADIO], [NEXT], <VHF#>, [NEXT]
or [RADIO], <RADIO DETAILS>, <VHF#>, [NEXT] or [RADIO], [RADIO], <VHF#>, [NEXT].
NOTE: The COM VHF radio equipment name can also be configured as “COM" or "VHF".
The VHF ident suffix "x" (e.g. VHF, VHF1...) and the side (left or right) where the COM units appear is
depending on the installation configuration. The tables below provide examples.
VHF1 TEST [5L]:
Toggles VHF1 test status & results. Toggle options for test status are READY, CONFIRM?,
STARTED. Pressing LSK the first time causes CONFIRM? to appear the second press initiates the tests. Test
result is: PASS or FAIL or TIMEOUT.
VHF2 TEST [5R]:
Same
as above, but referencing VHF2 instead of VHF1.
RADIO [6L]:
Access to the RADIO top level page where the VHF radio is located.
1 R
2 R
3 R
4 R
5 R
6 R
VHF
2/2
V H F 1 T E S T V H F 2 T E S T
>
R E A D Y
R E A D Y
<
<
RADIO
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference