OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-172
November 19, 2009
B. When inserting of modifying a SECTOR SAR from the Inactive route SECTOR 1/1 page:
C. SECTOR SAR from the Inactive route SECTOR 1/1 page (after pressing CONFIRM).
ACT/MOD/blank(STATUS):
MOD indicates the search is not being executed. ACT indicates that the search
pattern is being executed. "blank" indicates an executed search fix has not been reached.
ID [1L] ]:
Name of starting search pattern waypoint. If a search pattern waypoint is defined in the route, its
identifier is displayed in the field and no entry is allowed. Otherwise, entries are allowed and the entered
identifier is displayed, if any. If no entries were made to both ID & REF ID fields, 5 boxes “
” are
displayed. Else, if an entry was made in REF ID field, 5 dashes “-----“ are displayed.
NOTE: When a new ID is entered the operator should clear the relative bearing and distance data field relative
to the previous ID by pressing [NEXT] then [PREV].
DIAMETER [1R]:
Value of the leg diameter (between 0.1 and 40 nm), default value is 4 nm. Subsequent
change of the parameter value, validated by pressing the <ACTIVATE> softkey followed by the EXEC key, will
become the new default value. This default value is preserved even after a cold-start.
1 R
2 R
3 R
4 R
5 R
6 R
RTE 2 SECTOR 1/1
I D D I A M E T E R
CMQ 10.0
N M
R E F I D A N G L E
----- 15
o
S A R B R G
120
T
M A X G S A C T I V E S A R
9 3
K T
N O N E
<
CANCEL
S A V E ?
CONFIRM
>
1 L
2 L
3 L
4 L
5 L
6 L
1 R
2 R
3 R
4 R
5 R
6 R
RTE 2 SECTOR 1/1
I D D I A M E T E R
CMQ 10.0
N M
R E F I D A N G L E
----- 15
o
S A R B R G
120
T
M A X G S A C T I V E S A R
9 3
K T
N O N E
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference