OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-43
November 19, 2009
3. Then the Bulls Eye target point can be created (use BULLS EYE 2/3 page). Definition of Bulls Eye Target
can be achieved by typing a waypoint ident (from any FMS databases) on LSK 1L. This will take the
waypoint coordinates and the ident and assigned them to the Bulls Eye Target point. Bulls Eye Target can
also be defined by entering directly coordinates on LSK 1R. In this case the ident will always be “BETGT”.
An alternative entry can also be made using a reference waypoint. The reference waypoint ident can be entered
at LSK 4L. Then the relative radial/distance from the reference waypoint to the Bulls Eye can be entered at LSK
4R. The Bulls Eye target can be defined as either a fixed waypoint or a moving waypoint. This selection is made
via the LSK 3L. When the Bulls Eye target is a moving waypoint, a track and ground speed is required to be
entered. This entry is done via LSK 2R. As an option, the Bulls Eye target altitude can be entered on LSK 3R.
In any case, the Bulls Eye Target point definition or modification can only be done when it is not part of the flight
plan.
A. Initial entry page for fixed Bulls Eye target.
1 R
2 R
3 R
4 R
5 R
6 R
BULLS EYE 2/3
BETGT
T G T I D / P O S
o
.
o
.
B R G / D I S
---
T
/---
N M
T Y P E M S L A L T
>
FIXED ------
F T
R E F W P T I D R A D / D I S
-----
o
/
N M
R E F W P T P O S
---
o
--.-- ----
o
--.--
<
SARSAT WPT DES+SAR
>
1 L
2 L
3 L
4 L
5 L
6 L
1 R
2 R
3 R
4 R
5 R
6 R
BULLS EYE 2/3
BETGT
T G T
I D / P O S
A C T R T E
N43
°
26.20 E004
°
52.32
B R G / D I S T K / G S
015
T
/270
N M
111
T
/
222
K T
T Y P E M S L A L T
MOVING ------
F T
R E F W P T I D R A D / D I S
-----
o
/
N M
R E F W P T P O S
---
o
--.-- ----
o
--.--
<
SARSAT WPT DES+SAR
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference