OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-55
November 19, 2009
RADIOS VOLUME 1/1 PAGE
The page is only available when the MC has failed and the FMS has taken the control of the volume levels.
Access to the RADIO VOLUME page is only available when the FMS has the control of the AMU.
Display RADIO VOLUME page 1/1 from the horizontal configuration by pressing [RADIO], <VOL> or [RADIO],
[NEXT], <VOL> or [RADIO], [RADIO], <VOL>.
NOTE:
Only the radio installed and for which the volume level can be controlled are displayed, except IC
which is not a configurable equipment.
↑
[1L]/[1R]/[3L]/[3R]/[5R]:
When the scratchpad is empty, the line select keys are used to decrement the
selected radio volume level. When a valid volume level is entered in the scratchpad and the line select key
pressed, the volume of the corresponding radio is set to that new value.
When the MC takes control of the volume levels while in the page, the volume levels will be displayed as status
only, therefore their display will change from large font white color to small font white color. Furthermore, after
exiting the page, access to the Radio Volume page from the RADIO top level page will not be available
anymore.
During the tuning process, the radio volume level is displayed in large font inverse white color. If the tuning
operation is not successful, the volume level is displayed in small font amber color as a warning to the pilot.
Furthermore, the FMS will provide warnings if the AMU or radios fail or are not responding to the tuning request.
The valid volume level range is between 0 and 20.
↓
[2L]/[2R]/[4L]/[4R]/[6R]:
When the scratchpad is empty, the line select keys are used to increment the
selected radio volume level. When a valid volume level is entered in the scratchpad and the line select key
pressed, the volume of the corresponding radio is set to that new value.
When the MC takes control of the volume levels while in the page, the volume levels will be displayed as status
only, therefore their display will change from large font white color to small font white color. Furthermore, after
exiting the page, access to the Radio Volume page from the RADIO top level page will not be available
anymore.
During the tuning process, the radio volume level is displayed in large font inverse white color. If the tuning
operation is not successful, the volume level is displayed in small font amber color as a warning to the pilot.
Furthermore, the FMS will provide warnings if the AMU or radios fail or are not responding to the tuning request.
The valid volume level range is between 0 and 20.
RADIO [6L]:
Access to the RADIO top level page where the VOLUME is located.
1 R
2 R
3 R
4 R
5 R
6 R
RADIO VOLUME 1/1
↑
↑
17
C O M 1
C O M 2
6
↓
↓
↑
↑
3
N A V 1
N A V 2
10
↓
↓
b
I C
14
<
RADIO
↓
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference