OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-15
November 19, 2009
COM1/2 [XX]:
Display and modify the active and standby frequencies/channels of the COM1/COM2 radio. Entry
may be made to the standby position only when a new value is in the scratchpad. If the scratchpad is empty it
toggles active/standby frequencies/channels. If the transmit mode activation (e.g. push-to-talk) is installed, the
frequency/channel is displayed in reverse video black font on green background.
NOTE: Name may differ (COM vs VHF) based on configured name.
NAV1/2 [XX]:
Display and modify the active and standby frequencies of the NAV1/NAV2 radio(s). Entry may be
made to the standby position only when a new value is in the scratchpad. If the scratchpad is empty it toggles
active/standby frequencies. When auto-tuning mode is active, an inverse video 'AUTO' is displayed below to the
NAV1/NAV2 fixed caption prompt. Returning to manual tuning mode requires 'DELETE' (press the [CLR] key) to
be assigned to the NAV1/NAV2 standby frequency or swapping of the active and standby NAV1/NAV2
frequencies. When a DME hold is set (via the NAV radio page), an inverse video 'HOLD' is displayed below to
the NAV1/NAV2 fixed caption prompt. Also, when DME hold is set, the double arrow toggle prompt disappears
to indicate that if an entry is made, the entered frequency will correspond to the active frequency (e.g. not the
standby), this is because the frequency displayed next to the HOLD prompt is the hold frequency.
ATC1/2 [XX]:
Display and modify active and standby ident of the active ATC radio (in a dual installation). Entry
may be made to the standby position only when a new value is in the scratchpad. If the scratchpad is empty it
toggles between active/standby idents. Also displays the Transponder mode (C= Altitude mode on, blank=
Altitude mode off) below the fixed caption ATC field. When the [SQK/IDT]
key is pressed the active Ident code
will be displayed in inverse green for the duration of the Squawk (18 seconds). During the duration of the
squawk, the CMA-9000 FMS is inhibit the toggle operation. If the transponder is in standby, an inverse video
'SBY' is displayed below the fixed caption ATC field.
NOTE: Name may differ (ATC vs TPDR vs XPDR) based on configured name.
ADF1/2 [XX]:
Display and modify the active and standby frequencies of the ADF1 or ADF2 radio. Entry may be
made to the standby position only when a new value is in the scratchpad. If the scratchpad is empty it toggles
active/standby frequencies. The ADF mode will be displayed in normal white font below the field ADF. Possible
values are: ADF, ANT, BFO. The BFO status has priority over ADF and ANT.
FM1/2 [XX]:
Display and modify the active and standby frequencies of the FM1 / FM2 radio. Entry may be made
to the standby position only when a new value is in the scratchpad. If the scratchpad is empty it toggles
active/standby frequencies. The value displayed starts with the channel (no leading zero), followed by the band
(L for lower and U for upper), and followed by the mode (D for duplex, S for simplex, R for relay).
UHF [XX]:
Display and modify the active and standby frequencies of the UHF radio. Entry may be made to the
standby position only when a new value is in the scratchpad. If the scratchpad is empty it toggles active/standby
frequencies.
PHONE [6L]:
Access to the PHONE TOP 1/1 page (if PHONE or HCS is configured).
RADIO DETAILS [6R]:
Access to the RADIO DETAILS page.
NOTE: This is equivalent of pressing the NEXT key while viewing the RADIO 1/3 page.
This page is printed under user's responsibility
and must not be retained for reference
