manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 578 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 578

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 Page 

A-132 

 

November 19, 2009 

 
HSI SCALE (5R): 

Entry and display of HSI full scale deviation (in nautical miles). Entry is only allowed during 

the en-route phase of flight. Either 1 nm or 5 nm can be entered as the HSI scale. {Displayed only if EFIS is 
configured and not configured for en-route navigation}.  If VNAV option is configured the title becomes “

HSI 

SCALES

” and an additional field for full scale value of vertical deviation (in ft) is displayed. 

 
MISSED APPR [6R]:  Not Shown.

 If the

 

prompt display is configured, prompt appears during final GPS 

instrument approach with no route modification in progress.  If configured for display, pressing the line select 
key adjacent to this prompt, the FMS will automatically sequence the Missed Approach Point (MAP) to the 
missed approach procedure otherwise it will have no effect. {Active when flying final approach}.

 

 

NEXT WPT [6R]: 

Not Shown.

 Prompt is displayed when automatic waypoint sequencing is not possible.  

Examples include when the active leg is vector, or an altitude-terminated leg without a Baro-Corrected altitude 
input.  Pressing NEXT WPT results in an immediate transition of navigation and guidance to the next waypoint 
in the flight plan. {Active when flying a manually terminated leg (ex. VECTOR)}. 

 

NOTE 1:  Special attributes associated with waypoints identifiers are: 

•

 

FAF:  When a Final approach fix waypoint identifier is displayed. 

•

 

MAP: When a Missed approach fix waypoint identified is displayed. 

•

 

SAR: When a Search pattern waypoint except for the search pattern origin is displayed. 

•

 

TDN: When a Hover Transition down waypoint identifier is displayed. 

•

 

MRK: When a Hover Mark waypoint identifier is displayed. 

•

 

IP: 

When the CARP Identification Point is displayed 

•

 

TP:  When the CARP Turning Point is displayed. 

•

 

SD:  When the CARP Slow-Down waypoint is displayed. 

•

 

CRP: When the CARP Greenlight waypoint is displayed. 

•

 

XTE:  When the CARP Redlight waypoint is displayed. 

•

 

ESC: When the CARP Escape waypoint is displayed. 

 

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments