manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 493 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 493

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 Page 

A-47 

 

November 19, 2009 

 
TRUE/MAG WIND [1L]:

 Display of the current wind direction and speed (in knots). If the wind cannot be 

computed by the CMA-9000 FMS, a large font is used and manual entry of a wind value is allowed; otherwise, 
manual entries are not permitted and the value is displayed in small font. The direction is in degrees TRUE or 
MAG, defaulted to the WIND REF configuration option, and has a 0 to 359 degrees range. When the scratchpad 
is empty and A/C is outside the polar region (latitude between N73 and S60), pressing LSK 1L will toggle 
between the True and Magnetic display options TRUE/MAG. The wind speed is in knots with a range of 0 to 200 
knots. The wind being displayed here is the same as may be observed on the PROGRESS 1/4 page. For the 
DVS, the wind value is used by the CMA-9000 FMS in the estimate of a surface water current. 
 

WATER CURRENT [2L]:

  Entry of the water speed in the direction the current is flowing towards. Speed is 

entered in knots with a range of 0 to 40 knots. The direction is entered in degrees, TRUE or MAG following the 
TRUE/MAG discrete, with a range of 0 to 359 degrees. Default value on cold start is 0 degree and 0 knot. 
 

NAV STATUS [6L]:

  Access to NAV STATUS INDEX 1/1 page. 

 
 

EFIS 1/X (if EFIS interface is configured) 

 
The EFIS page enables the pilot to selectively filter background data sent to the EFIS by the CMA-9000 FMS. 
This page is not available for the IFDS, AHCAS, or EFIS-84 EFISs (which do not allow background data). 
 
Display EFIS 1/1 page by pressing [INIT REF], [NEXT], and <EFIS>. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

NAVAID [1L]: 

Enables or disables the output of the navaids to EFIS. Toggle options: ON/OFF. 

 

AIRPORT [1R]: 

Enables or disables the output of the airports to EFIS. Toggle options: ON/OFF.

 

 
NDB [2L]: 

Enables or disables the output of NDBs to EFIS. Toggle options: ON/OFF.

 

 
USER WPT [2R]: 

Enables or disables the output of User waypoints to EFIS. Toggle options: ON/OFF.

 

 
SARSAT [3L]: 

Enables or disables the output of SARSAT waypoints on the EFIS. Toggle options: ON/OFF.  

Displayed only if a DF is configured. 
 

NOTE:  When this option is set to ON, only the SARSAT waypoints selected on the SARSAT WPT 1/1 page are 

output  to the EFIS.

 

1 R

2 R

3 R

4 R

5 R

6 R

          EFIS      1/1

  N A V A I D                   A I R P O R T  

>

ON                  ON

<

  N D B                       U S E R   W P T  

>

ON                  ON

<

  S A R S A T               B U L L S   E Y E  

>

ON                  ON

<

 
 
 
 
 

<

INIT/REF 

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments