Esterline CMA-9000, Operator'S Manual, Page: 777 / 802

OPERATOR’S MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page E-27
November 19, 2009
ADVISORY
MESSAGE DESCRIPTION ACTION APPLICABLE
CONFIGURA-TION
NAV1 FAILED
NAV2 FAILED The FMS detects a failure with
the NAV (VOR/ILS) radio or the
NAV radio communication bus. Try to control the NAV radio
from another source. NAV
receiver is no longer
operational, use other
navigation aids.
Advise maintenance.
•
NAV radio interface
•
NAV radio name is
configured to NAV
GPS ANTENNA
FAILED The GPS sensor detects a GPS
antenna failure and goes in GPS
DR navigation. Advise Maintenance. EGI interface
PHONE FAILED The FMS detects a failure of the
Iridium Phone communication
bus. Advise Maintenance. Iridium Phone interface
PLS FAILED The FMS detects a failure of the
PLS range or the PLS steering
or a failure of the PLS
communication bus. Take alternate means for
location missions.
Advise maintenance. PLS interface
RADAR FAILED The FMS detects either:
1) A failure or loss of
communication with the FIAR
1500B Radar equipment, or,
2) Latitude and longitude labels
received from the FIAR 1500B
Radar equipment have different
SSMs from each other for 5
seconds. Ensure that the RADAR is
powered.
Verify if the Radar operate(s)
normally.
Advise maintenance. Installations in which the
FIAR 1500B Radar is
configured.
RALT FAILED
RALT1 FAILED
RALT2 FAILED The FMS detects a failure of the
Radio Altimeter or a failure of the
Radio Altimeter communication
bus. Ensure that RALT is powered.
Verify if the RALT operates
normally.
Advise maintenance. Radar Altimeter interface
TACAN FAILED TACAN receiver input failure or
a failure of the TACAN receiver
or a receiver communication bus
has been detected. Ensure that the identified
TACAN receiver is powered.
Verify if the TACAN receiver
operates normally.
Advise maintenance. TACAN interface
TPDR1 ALT
FAILED
TPDR2 ALT
FAILED The FMS has detected a failure
of the transponder altitude bus Do not use transponder Mode
C capability.
Advise maintenance.
•
ATC transponder
interface
•
ATC transponder name is
configured as TPDR
TPDR1 FAILED
TPDR2 FAILED The FMS has detected a failure
of the ATC transponder or a
failure of the ATC transponder
communication bus. Control transponder from
another source.
Advise maintenance.
•
ATC transponder
interface
•
ATC transponder name is
configured as TPDR
This page is printed under user's responsibility
and must not be retained for reference