OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
3-17
November 19, 2009
VERIFYING ACTIVE ROUTE LEGS BY COURSE AND DISTANCE
Display the MOD RTE x LEGS 1/X page by pressing [LEGS].
1. Verify the course and distance of all route legs.
2. Display all route legs in sequence by pressing [NEXT] as often as required.
3. Return to the MOD RTE x LEGS 1/X page by pressing [LEGS] or [PREV] as required.
4. Make the route active by pressing [EXEC].
The "MOD" status in the title line changes to "ACT", the ERASE prompt disappears and the EXEC
annunciator extinguishes.
INITIAL LEG
Following the waypoint of a route, navigation and guidance is computed initially for the leg from present position
direct to the first waypoint. On takeoff, the CMA-9000 FMS automatically re-computes a Direct-To to the first
waypoint.
If a runway and SID are selected and the first leg is not a Direct-To leg, navigation and guidance is computed
initially from the runway threshold to the first waypoint. On take-off, the CMA-9000 FMS automatically re-
computes the initial leg using the present position as the start of the leg.
To navigate a different first leg, follow any of the route modification procedures described in Section 5.
CANCELLING ANY PROCEDURE OR ROUTE MODIFICATION
During any procedure which involves a modification to the active route, an ERASE prompt is displayed at
LSK 6L. Prior to EXECuting the procedure, it can be cancelled and all route modifications deleted by pressing
<ERASE> (LSK 6L).
1 R
2 R
3 R
4 R
5 R
6 R
MOD
RTE 1 LEGS 2/4
2 9 9
o
3 9 . 6
N M
CAFTA
2 9 8
o
1 5 4
N M
YZP
3 0 7
o
8 6 . 7
N M
MOCA1
3 0 6
o
1 6 5
N M
BKA
2 8 2
o
1 9 7
N M
KILLA
<
ERASE
LEGS ETA
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
