
OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-89
November 19, 2009
POSITION (1R):
•
For EGI: Displays inertial position.
•
For LTN92: Displays pure inertial position.
•
For LTN_101, ADIRU or LASEREF_V: Displays pure inertial position.
ACCURACY (2R):
For EGI: Displays INS quality factor (in nm).
PGM NUMBER(2R):
For LTN92: If configured, Displays IRS software program number.
NOTE: Only displayed on the onside IRS STATUS page.
TK/GS (3R):
Displays Inertial track True or Mag angle (degrees) and ground speed (knots).
ALT (4R):
•
For EGI: Displays hybrid baro inertial altitude (Ft) when EGI is configured.
•
For LTN_92, LTN_101, ADIRU or LASEREF_V: Displays baro inertial altitude (Ft).
NAV TIME (5R):
For EGI: This label is displayed only when the INS/GPS is in NAV mode. Displays the amount
of time the INS has been in NAV mode.
START/END TEST [5R]:
For LTN_101, ADIRU or LASEREF_V: Initiates the ADIRS Remote Test
.
Once the
test is initiated, the
START TEST
prompt is replaced by
END TEST
to allow the termination of the test in
progress.
MALFUNCT [5R]:
When LTN92 is configured, access to the IRS MALF MESSAGE X/X page. Appears only
when an INS fault is present.
UPDATE POS [6R]:
For EGI: Access to the UPDATE POS 1/1 page. This label is displayed only when the INS-
GPS is in NAV mode.
STOP ALIGN [6R]:
For EGI: This label is displayed only when the INS-GPS is in ALIGN mode and is
interruptible (alignment counter is between 100 and 50). The selection of this softkey when active will send a
command to the INS-GPS to stop alignment.
CMD NAV [6R]:
For EGI: This label is displayed only when the INS-GPS is not in NAV mode. The selection of
this softkey will send a command to the INS-GPS to command NAV mode when confirmed.
NOTE: INS-GPS will transition to degraded NAV mode if this selection is made when alignment counter is
between 50 and 00.
ACCURACY [6R]:
For LTN92, LTN_101, ADIRU or LASEREF_V: Access to the corresponding IRSx
ACCURACY x/3 page. Appears only when IRSx is in NAV mode.
This page is printed under user's responsibility
and must not be retained for reference