manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 499 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 499

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 Page 

A-53 

 

November 19, 2009 

 
ENDURANCE (2L):

  Displays calculated endurance (hours), given current or estimate fuel weight (excluding 

reserve) and fuel flow. 
 

FUEL FLOW  [3L]:

 

Displays the fuel flow. 

•

 

For the active route fuel page, the current rate of fuel consumption from the fuel sensor. A value (0-32728 
kg/hr or 0-32728 lb/hr)  may be manually entered if the fuel flow rate is unavailable from the sensor or for 
estimation purposes and will be displayed in large font. When the fuel flow from the fuel sensor is no longer 
received, the last valid fuel flow value received is stored as a manually entered value and the display is 
changed from normal to large font. If the CMA-9000 FMS is cold started, the aircraft on ground and the fuel 
flow is not available from fuel sensor "-----" is displayed.  

 

•

  For the inactive route fuel page, the fuel flow value corresponding to the SIMUL RTEx page value is 

displayed in medium font if the SIMUL_PG option is configured. Otherwise, the current rate of fuel 
consumption from the fuel sensor is displayed in medium font. A value (0-32728 kg/hr or 0-32728 lb/hr) may 
be manually entered if the fuel flow rate is unavailable from the sensor or for estimation purposes only if the 
SIMUL_PG option is not configured and will be displayed in large font. When the fuel flow from the fuel 
sensor is no longer received, the last valid fuel flow value received is stored as a manually entered value 
only if the SIMUL_PG option is not configured and the display changed from normal to large font. If the 
SIMUL_PG option is configured, any manual entry is rejected and the “!NO ENTRY ALLOWED” advisory 
message is displayed. 

 
FUEL REMAINING AT (4L):

 

Displays calculated fuel remaining at a fix, given current fuel weight (excluding 

reserve), fuel flow, true airspeed, and wind.  

 
RTE 1 FUEL [6L]:

  Access to RTE 1 FUEL 1/2 page 

 

RTE 2 FUEL [6L]: 

Access to RTE 2 FUEL 1/2 page 

 

ERASE [6L]:

  

Cancel modifications to flight plan (Erase modified flight plan). If ERASE_MODS option is 

configured to CONFIRM, then upon pressing ERASE a confirmation is requested by displaying 
CANCEL/CONFIRM prompts on line select keys 6L and 6R respectively. 
 

RESTORE [6L]:

  Displayed only if the RTE was erased on the RTE 1/X page. Used to restore the active route. 

 

CANCEL [6L]:

  {If ERASE MODS is configured as CONFIRM} Cancels the changes made to the inactive route. 

 

GROSS WT (1R):

   Displays calculated or received total aircraft gross weight.  

•

 

Received from Fuel Computer: 
If the gross weight is received from an external source, then the received value is displayed (in normal white 
font). 

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments