OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-139
November 19, 2009
RADIAL-TO 1/1
Display RADIAL-TO 1/1 page by pressing [INIT REF], <DES+SAR> or <TACTICAL>, enter identifier in the REF ID
field, and <RADIAL-TO> or [INIT REF], <DES+SAR> or <TACTICAL>, <RADIAL-TO> or appending ‘/R’ to an
existing waypoint on the RTE LEGS page.
Used to enter the parameters defining a Radial-To procedure: waypoint identifier, inbound course and distance.
FIX [1L]:
Destination waypoint of the radial-to procedure. The identifier entered is checked to ensure that:
•
All characters are alphanumeric; and
•
the maximum size of the identifier is 5 characters; and
•
the identifier exists in one of the following databases: NDB, LIB, TMP, USR or RTE; or is one of the Bulls
Eye waypoints and
•
the identifier is not a moving waypoint.
INBD CRS [2L]:
Radial on which the temporary waypoint will be created. Acceptable range is 0 to 360
degrees.
DISTANCE [3L]:
Distance from the FIX in nautical miles. Acceptable range is 0 to 99.9 nautical miles.
NEW RADIAL-TO [6L]:
Used
to place the procedure (example: YUL016/10/R) in the scratchpad and switch to
the RTE x LEGS 1/X page.
1 R
2 R
3 R
4 R
5 R
6 R
RTE 1 RADIAL-TO 1/1
F I X
YUL
I N B D C R S
016
o
D I S T A N C E
10.0
N M
<
NEW RADIAL-TO
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
