manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 688 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 688

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 Page 

A-242 

 

November 19, 2009 

 

CANCEL [6L]: 

 Cancel the changes made to the inactive route. 

 

DIR/SPD [1R, 2R, 3R, 4R]: 

Allows entry of wind direction and speed for the given waypoint at the corresponding 

flight level.  Entry is only allowed once a flight level has been entered. 
 

CARP PLAN [5R]:

 Access to the CARP PLAN 2/3 page. Displayed on page WIND 1/1. 

 

CONFIRM [6R]: 

Confirm the changes made to the inactive route. 

 
 

WPT DATA 1/1 

 
The WPT DATA 1/1 page allows for the display and partial modification of waypoint information from the 
navigation, temporary, custom, or user databases. Moving (if configured) and fixed waypoints information may 
be viewed. It also provides access to the USER WPT page for modification of all user waypoint parameters.  
 
Display WPT DATA 1/1 page by pressing [INIT REF], and <WPT DATA>. 
 
A.  Display upon entry into the page (with no identifier being supplied from the previous page): 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1 R

2 R

3 R

4 R

5 R

6 R

       WPT DATA     1/1  

  I D  

-----  

           

 

 

 

 

 

 

   

 

<

NEW USER WPT   DES+SAR

>

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments