OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
14-8
November 19, 2009
1. Key in the gross weight (e.g., 10600) and move it into the GROSS WT field by pressing LSK 1L.
2. Key in the pressure altitude (e.g., 10300) and move it to the PRESS ALT field by pressing LSK 3L.
3. Key in the outside air temperature (e.g., +25) and move it to the OAT field by pressing LSK 4L.
SIMUL RTEx 3/3 or 1/1 (If SIMUL PG and RTE2 options is Configured)
Display SIMUL RTEx 3/3 or 1/1 page by pressing [INIT REF], [NEXT], <SIMULATE> (LSK 2R), and [PREV].
Any of values in the fields 1L, 1R, 2L, 2R can be modified by the pilot by manually entering a desired value.
1. Press the LEGS ETA prompt (LSK 6L) to access the RTE x LEGS ETA 1/X page which presents the
ETA/EFA computed for the waypoints of the inactive route.
NOTE: If the inactive route does not exist, the CMA-9000 FMS copies the active route into the inactive route
when the inactive route LEGS ETA/EFA page is accessed in order to perform simulated ETA/EFA
computations. If an inactive route already exists, the CMA-9000 FMS allows the pilot to copy the active
route into the inactive route in order to perform simulated ETA/EFA computations using the active
route (note: the previous inactive route will be overwritten and unretreivable).
2. Press the LEGS POS prompt (LSK 6R) to access the RTE x LEGS POS 1/X page, which presents the
coordinates of the waypoints of the inactive route.
3.
Press the RTE COPY prompt (LSK 5L) to copy the active route into the inactive route
NOTE: The previous inactive route is deleted and un-retrievable). When RTE COPY is selected, LSK 6L is
replaced with “<CANCEL”, LSK 6R is replaced with “CONFIRM>” and “SAVE?” is displayed.
4.
Press the DEFAULT VAL prompt (LSK 5R) to override the user-entered simulated settings (CRZ TAS, CRZ
WIND, FUEL FLOW and FUEL WT) with the on-ground or in-air default settings.
1 R
2 R
3 R
4 R
5 R
6 R
SIMUL RTE2 3/3
C R Z T A S C R Z W I N D
1 3 0
K T
1 3 4
T
/ 2 0
K T
F U E L F L O W F U E L W T
1 3 0
K G / H R
1 4 0 0
K G
<
RTE COPY
DEFAULT VAL
>
<
LEGS ETA
LEGS POS
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference