OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-148
November 19, 2009
RUNWAY [2L]:
Runway entry. Valid entries are origin airport runways. Line may be selected via DEPARTURE
page. Deleted upon reaching first waypoint.
FLT NO [2R]:
Flight number. Displays entered company flight number. Displays dashes until valid flight
number is entered. Valid flight number may only be alphanumeric and up to 8 characters long.
NOTE: When the M425 IFF is configured, the flight ID seen on this page corresponds to the flight number as
seen on the IFF page, e.g. changing this field changes the value seen on the IFF page, and vice-versa.
DMAP APPEND [3L]:
This prompt appears only if DMAP ELBIT, EURONAV or EURONAV_A702 type is
configured. Pressing this key toggles the DMAP append mode On/Off. If the DMAP append mode is ON, and a
valid DMAP waypoint is received from the DMAP unit, and the DMAP waypoint was successfully stored in the
DMAP Reserved waypoint List, then the received DMAP waypoint is appended to the end of the route, or before
the first encountered discontinuity. If an inactive route page is being displayed, then the DMAP waypoint is
included in the inactive route.
ROUTE [3R]:
Enter Custom Route or User Route (name) and press [EXEC] key.
•
Custom Route Name displayed when route has been loaded using USER ROUTES or SELECT CO ROUTE
pages.
•
Custom Route Name or User Route name entered by the operator and executed with the [EXEC] key.
ERASE RTEx [4L]:
Erases the current displayed non-empty route (active or inactive – e.g. origin, destination
and all waypoints on the LEGS page). This option is only displayed when the displayed route is not empty and
when the CMA-9000 FMS is configured for single mode of operation.
NOTE: RTEx corresponds to RTE1 or RTE2 depending on which route is being displayed.
For the active route:
•
When LSK 4L is selected, the active route is erased, the route status becomes MOD and RESTORE is
displayed at LSK 6L to allow the user to undo the erase operation. Pressing RESTORE returns to the
previous active route. Pressing the EXEC key accepts the erase operation (active route becomes empty).
For the inactive route:
•
When LSK 4L is selected, the inactive route is erased, CANCEL is displayed at LSK 6L and CONFIRM is
displayed at LSK 6R. Pressing CANCEL returns to the previous inactive route. Pressing CONFIRM accepts
the erase operation (inactive route becomes empty).
RTE XFILL [4L]:
This prompt appears only in independent mode of operation. Key press transfers the active
route to the off-side FMSs. Press [EXEC] key on the off-side FMSs to activate transferred route. This prompt
disappears when using this key to cross-fill the route to the off-side FMS and reappears if the route is modified on
one of the CMA-9000 FMSs.
CO ROUTES [4R]:
Access to SELECT CO ROUTE 1/X page
RTE COPY [5L]:
Displayed only on an inactive route page and when at least one waypoint is present in the active
route. Key press copies active route onto inactive route.
BACKTRACK [5L]:
Pressing this key will create a modified route containing:
•
as a configurable item, the active TO waypoint followed by a discontinuity; then
•
the waypoints of the backtrack route at the moment the key was pressed.
The MOD RTE x LEGS page will be displayed. As for any route modification, the backtrack route may then be
modified and executed. This key is only available on the active route page.
USER ROUTES [5R]:
Access to USER ROUTES 1/1 page.
This page is printed under user's responsibility
and must not be retained for reference
