OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-37
November 19, 2009
CARP [3R]:
Displayed when CARP is configured. Pressing the line select key:
•
If SAR waypoint is not entered in field REF ID of the DES+SAR page and no CARP procedure exists in the
flight plan then display the LEGS page with CRP01/C in the scratchpad.
•
If SAR waypoint is not entered in the field REF ID of the DES+SAR page and a CARP procedure exists in
the flight plan then display the CARP PLAN 1/3 page.
•
If SAR waypoint is entered in the field REF ID of the DES+SAR page and no CARP procedure exists in the
flight plan then display the LEGS page with the identifier and /C qualifier in the scratchpad allowing entry in
the flight plan.
•
If SAR waypoint is entered in the field REF ID of the DES+SAR page and it is different from the PI of the
existing CARP procedure then display the CARP PLAN 1/3 page with the identifier in the scratchpad.
•
If SAR waypoint is entered in the field REF ID of the DES+SAR page and it has the same identifier as PI of
the existing CARP procedure then display the CARP PLAN 1/3 page.
TACT APPR [4R]:
Displayed when the TACT APPR option on the CONFIG page is configured.
•
If no SAR waypoint is entered in the field REF ID of the DES+SAR page and no previously defined tactical
approach Runway Threshold Waypoint then display default LEGS page with the /A qualifier in the scratchpad
allowing entry in the flight plan.
•
If no SAR waypoint is entered in the field REF ID of the DES+SAR page and previously defined the tactical
approach Runway Threshold Waypoint then display the TACTICAL APPR page.
•
If SAR waypoint is already defined then display the default LEGS page with the identifier with the /A qualifier
in the scratchpad allowing entry in the flight plan.
DESELECT 1/1
The DESELECT 1/1 page displays the status of the system True Air Speed (TAS) and Heading data. It is also
used to prevent usage of any unsuitable sensor for navigation (GPS, VOR, TAS, HDG, KALMAN, DME, etc).
NOTE: Flight crew must deselect all unwanted sensors after each long power outage. All sensors are
automatically re-selected after a long power outage.
Display DESELECT 1/1 page by pressing [INIT REF], <NAV STATUS>, and <DESELECT>.
A. Display with EGI interfaces configured:
1 R
2 R
3 R
4 R
5 R
6 R
DESELECT 1/1
T A S G P S
>
VALID VALID
<
H D G D M E
>
VALID VALID
<
D V S V O R / D M E / T C N
>
ACQ ACQ
<
I N S / G P S
>
ACQ
I N S / D V S
>
ACQ
<
NAV STATUS
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference