OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
3-12
November 19, 2009
ACTIVE ROUTE SELECTION USING THE USER ROUTE NAME
Display the RTE 1/X page by pressing the RTE function key.
1. Press the <USER ROUTES> prompt (LSK 5R) the USER ROUTES 1/X page is displayed.
2. Select from the USER ROUTES 1/X page the user route identifier, e.g.: KSEAPANC1.
The RTE 1/X page is re-displayed with the user route identifier displayed at the ROUTE field, LSK 3R.
"MOD" status is displayed in the title line. A "!WAIT" advisory message appears in the scratchpad while the
route information is being extracted from the navigation database.
3. Verify the ORIGIN and DEST identifiers.
4. Enter flight number into the scratchpad. Move to the FLT NO field by pressing LSK 2R.
5. Accept the new active route by pressing [EXEC].
"MOD" status in the title line changes to "ACT". The selected route is now active.
NOTE: When loading a user route in flight, the CMA-9000 FMS will append a "+" to the user route identifier on
the ROUTE page thus indicating that the user route has been appended to the end of the current flight
plan.
When a user route is inversed, the route name is preceded by the prefix INV in reverse video.
1 R
2 R
3 R
4 R
5 R
6 R
MOD
RTE 1 1/3
O R I G I N D E S T
KSEA PANC
R U N W A Y F L T N O
----- KL007
D M A P A P P E N D R O U T E
>
OFF KSEAPANC1
<
ERASE RTE1
CO ROUTES
>
<
BACKTRACK USER ROUTES
>
O F F S E T
<
RTE 2
R0.0
N M
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference