OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-58
Revision 2 March 01, 2010
SELECT NAME OR PHONE# [1R]:
If the phone number or the name/phone number exceeds 24 characters,
then it will be possible to see the extra characters by pressing this soft key. The display will scroll to show the
extra characters.
SIGNAL STRENTGH [4L]:
Displays the signal strength of the phone. (This field is only visible for the iridium
phone configuration).
POWER [4R]:
Turns the phone ON or OFF.
(This field is only visible for the GSM phone. Not applicable to Iridium configuration).
NOTE: W
ill display dashes when communication is totally lost.
CALL [5R]:
Initiates the phone call. This will transmit a DIAL command to the phone transceiver using the
displayed phone number. When CALL is selected, the page PHONE VOICE CALL 2/2 is automatically
displayed.
For the Iridium phone:
This prompt is blank if:
•
No phone number has been entered, or
•
The phone is not available (e.g. failed), or
•
The call status is: RINGING, DIALING or CONNECTION ESTABLISHED (phone is busy).
For the GSM phone:
in S/W 300: This prompt is blank if:
•
No phone number has been entered, or
•
The phone is not available (e.g. failed), or
•
The call status is: RINGING, DIALING or CONNECTION ESTABLISHED (phone is busy).
in S/W 300V and higher: This prompt is blank if:
•
No phone number has been entered, or
•
The phone is not available (e.g. failed).
PHONE TOP [6L]:
Access to PHONE top page.
LIBRARY [6R]:
Access to PHONE LIBRARY page.
This page is printed under user's responsibility
and must not be retained for reference