OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-182
November 19, 2009
AUX LOC DEV (3R):
Display the auxiliary radio-location device available on board of the distress aircraft or
ship. The possible display are:
•
"NONE": No auxiliary radio-locating device
•
"121.5 MHz": 121.5MHz locator beacon
•
"9 GHz": Maritime 9 GHz (SART)
•
"OTHER": Other auxiliary radio-locating device(s)
This field is blank for the PLB beacon type or if the data cannot be decoded.
15 HEX ID (4L):
Display the received 15 hexadecimal characters (15 HEX ID) identifying each 406 MHz
COSPAS-SARSAT beacon.
DISPLAY [4R]:
Toggle options: ON/OFF. When set to ON, the current SARSAT waypoint is selected for output
to the EFIS. When set to OFF, the current SARSAT waypoint is not transmitted to the EFIS. If the POS is not
available, this option is forced to OFF and the field cannot be toggled (the "<" is not displayed). This field is only
displayed when one of the following EFIS is configured: SPERRY, SPERRY2, GAMA, SEXTANT, ROCKWELL,
ROCKWELL2, ROCKWELL3, BARCO, AHCAS2, MEGGIT or Primus Epic, otherwise, this field is blank.
SARSAT WPT [5L]:
Access to SARSAT WPT 1/1 page.
BULLS TGT [5R]:
Access the BULLS EYE 2/3 page and put the SARSAT waypoint coordinates as default
BULLS EYE TARGET waypoint coordinates and the SARSAT waypoint as the REF waypoint. This prompt will
only be displayed when the SARSAT waypoint coordinates are valid and the BULLS EYE is configured.
NEW USER WPT [6L]:
Access to USER WPT 1/2 page and put the SARSAT waypoint coordinates and ident as
default user waypoint coordinates and ident. This prompt will only be displayed when the SARSAT waypoint
coordinates are valid.
DES+SAR [6R] or TACTICAL [6R]:
When TACT key is configured, the DES+SAR prompt is replaced by
TACTICAL. In this case, the prompt gives access to the TACTICAL page instead of the DES+SAR page.
Access to DES+SAR 1/Y (or TACTICAL 1/Y) page. The SARSAT waypoint will automatically be converted to a
temporary waypoint and placed in the REF ID field on the DES+SAR 1/Y (or TACTICAL 1/Y) page. This field
will only be displayed when the SARSAT waypoint coordinates are valid.
This page is printed under user's responsibility
and must not be retained for reference
