OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
5-33
November 19, 2009
ROUTE 2 OPTION
When configured with RTE 2 option, two independent routes (RTE 1 and RTE 2) may reside in the CMA-9000
FMS at the same time. The CMA-9000 FMS allows activation of one route as the active flight plan. The other
flight plan is stored as the inactive route. The default route at power-up, with both routes empty, is RTE 1.
The inactive route may be manually created or selected from the stored custom routes. It may also be copied
from the active route. The procedures to create, select, and/or edit the inactive route are identical to those of
the active route.
When configuring the NO xFMS option, the prompt ERASE RTEx appears at LSK 4L when RTE x is defined. It
allows to erase the RTE x.
1. Display the ACT RTE x 1/X page by pressing [RTE] (a route has been previously entered and executed).
2. Access the inactive route by pressing LSK 6L (e.g. RTE 2).
NOTE: The inactive route pages are displayed in monochrome cyan to distinguish them from the active route
pages.
1 R
2 R
3 R
4 R
5 R
6 R
ACT RTE 1 1/2
O R I G I N D E S T
KSEA PANC
R U N W A Y F L T N O
23R AS007
R O U T E
KSEAPANC1
<
ERASE RTE1
CO ROUTES
>
<
BACKTRACK USER ROUTES
>
O F F S E T
<
RTE 2
R0.0
N M
1 L
2 L
3 L
4 L
5 L
6 L
1 R
2 R
3 R
4 R
5 R
6 R
RTE 2 1/2
O R I G I N D E S T
R U N W A Y F L T N O
----- --------
R O U T E
----------
CO ROUTES
>
<
RTE COPY USER ROUTES
>
<
RTE 1 ACTIVATE
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference