manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 348 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 348

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 

Page 13-20 

November 19, 2009 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

NOTE:  The page layout can differ based on the radios equipment, configured radio names and assigned power 

control. 

 

IFF PWR [1L]:

 Toggles IFF power status for the IFF transponder. The possible values are OFF or ON.

 

 

ALL ON [6L]: 

Provides the capability of setting the power status to ON for all the specific radios displayed in the 

RADIO PWR page. 

 
NOTE:  This prompt is not displayed when all the radios shown on the RADIO PWR page(s) are ON.

 

 

ALL OFF [6R]: 

Provides the capability of setting the power status to OFF  for all the specific radios displayed in 

the RADIO PWR page. 
 

NOTE:  This prompt is not displayed when all the radios shown on the RADIO PWR page(s) are OFF.

 

 
 

NAVIGATION RADIOS (NAV DME RADIO) 

 

NOTE:  NAV Radio equipment name can be configured as “NAV”, “VOR” or “VIR”. 

 
The FMS will support the following NAV and DME Radios in the frequency range and channel spacing specified 
below: 
 

RADIO MODEL 

FREQUENCY RANGE

 

CHANNEL SPACING

 

NOTE

 

BK DM-441B 

108.00 – 117.95 MHz 

50 KHz 

- 

RC DME-442 

108.00 – 117.95 MHz 

50 KHz 

- 

RC DME-4000 

108.00 – 117.95 MHz 

50 KHz 

- 

RC DME-42 

108.00 – 117.95 MHz 

50 KHz 

- 

 

NOTE:  The CMA-9000 FMS does not accept out of range values. An error message will appear in the 

scratchpad if invalid entries are made by the user. If the FMS has been disable for radio tuning via a 
discrete input, entries made to these radios will generate an error message "RADIO TUNING 
DISABLED” to inform the pilot that he may no longer tune this radio from the FMS.

 

1 R

2 R

3 R

4 R

5 R

6 R

        RADIO PWR   4/5 

  I F F   P W R              

>

OFF          

  

   

 

   

           

  

  

 

 

 

   

 

 

 
 
 

>

ALL ON 

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments