manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 396 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 396

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 

Page 13-68 

Revision 2 March 01, 2010 

 

PHONE PRECANNED SMS 1/1  

 
Display PHONE PRECANNED SMS 1/1 page by pressing [RADIO], <PHONE>, <PRE-CANNED SMS> (When 
the PHONE or HCS is configured), or 

 [ANS] (When the HCS (GSM phone) and ANS key are configured and no 

new unread message nor new received call)  

 
NOTE:  The PHONE can only be configured in the "vertical" configuration option of the RADIO top page.

 

 
A.   This page is defined to allow quick reporting of aircraft status by use of pre-canned SMS text message 

templates. Pre-canned templates may be defined and loaded into the system using an external data loader. 
Each template includes a header of up to 10 characters for use as a menu item, the template location 
[1L…6R] and an expanded text message template. When the pre-canned message contains additional 
template text the menu selection is shown with a large white font rather than a small white font for empty 
messages. The menus prepared below are from a sample application (NOTE: MISSION 1, 2, 3 and GND 
BUSY contain template text while the other selections do not).  

 

 

NOTE: MISSION 1, 2, 3 and GND BUSY contain template text while the other selections do not. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
B.  Page display after a pre-canned SMS text message containing additional text was selected: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1 R

2 R

3 R

4 R

5 R

6 R

 PHONE:PRECANNED SMS 1/1

 

      

 

>

MISSION1      

G N D   F R E E

<

           

>

MISSION2      GND BUSY

<

               

>

MISSION3    

I N   S E R V I C E

<

   

       

        

A I R B O R N E

<

   

>

E M E R G E N C Y

                             

 

<

PHONE TOP          

 

 

1 L

2 L

3 L

4 L

5 L

6 L

1 R

2 R

3 R

4 R

5 R

6 R

    PHONE: SEND SMS 1/3

  S E L E C T   N A M E   O R   P H O N E #      

- - - - - - - - - -                              

 

 

 

 

  S I G N A L   S T R E N G T H      

8 0 %

 

 
 
 

<

PHONE TOP      LIBRARY

>

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments