OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-21
November 19, 2009
NAVIGATION RADIOS (NAV Page 1/2)
This page allows the pilot to control the operation of the NAV and DME radios by transmitting and receiving digital
labels capable of controlling up to 2 NAV and 2 DME radios.
Display the first NAV 1/2 page from the horizontal configuration by pressing [RADIO], <NAV#> or [RADIO],
[NEXT], <NAV#> or [RADIO], [RADIO]*, <NAV#>.
Display the first NAV 1/2 page from the vertical configuration by pressing [RADIO], [NEXT], <NAV#> or [RADIO],
<RADIO DETAILS>, <NAV#> or [RADIO], [RADIO]*, <NAV#>.
NOTE: NAV Radio equipment name can be configured as “NAV”, “VOR” or “VIR". The case displayed above is
the “NAV” configuration.
NOTE: The NAV and DME ident suffix "x" (e.g. NAV, NAV1...) and the side (left or right) where the NAV/DME
units appear is depending on the installation configuration.
* The FMS can be configured so that pressing the RADIO key successively toggles through RADIO
page Y/X.
NAV1 [1L]:
Display and modify active/standby NAV frequency, ident and preset of the NAV1 radio.
If configured,
the crew has the option to activate or deactivate the VOR auto-tuning mode. The crew may be presented to the
right of the title of this prompt, the text “AUTO” or “MAN” (as a function of what has been configured) to highlight
whether or not the VOR auto-tuning mode is activated or not.
Toggling between auto-tuning and manual tuning can be achieved by selecting and entering “DELETE” (press
the [CLR] key) to the NAV1 standby frequency. Returning to manual tuning mode can alternately be achieved by
swapping the active and standby NAV1 frequencies. Once the switch to automatic occurs the active frequency
will be replaced by a frequency selected automatically and the manually entered frequency will be lost.
NOTE: ILS ident validation within the FMS occurs by referencing the Recommended Navaid embedded within
the approach procedure since validation of the station’s Morse code ident is not available to the FMS.
NAV2 [1R]:
Same
as above, but referencing NAV2 instead of NAV1.
NOTE: If the NAV function is set to MANUAL, the tuning selection indicator is disabled.
LOC/RAD [2L], [2R]:
Depending on the active frequency, the following is displayed:
•
NAV VOR radial when VOR frequency is tuned; or
•
NAV LOCalizer course when a LOCalizer frequency is tuned.
1 R
2 R
3 R
4 R
5 R
6 R
NAV
1/2
N A V 1 N A V 2
b
111.90
I Z Z
Y U L
116.30
b
1 1 6 . 7 0
- - - -
- - - -
1 1 2 . 8 0
L O C :
o
R A D :
1 8 0
o
D M E 1 H O L D D M E 2 H O L D
>
OFF OFF
<
D M E :
1 3 0
N M
D M E :
1 2 . 0
N M
<
RADIO LIBRARY
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
