OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-152
November 19, 2009
TO [1R to 5R]:
To waypoints:
•
Valid entries are published waypoints, VHF navaids, runways, and ICAO airport identifiers.
•
Valid created waypoint types are: Place-Bearing-Distance (PBD), Lat/Long and Place-Bearing-Place-Bearing
(PB-PB).
•
Waypoint
on
airway.
•
Seven (7) character waypoint identifier for oceanic latitude/longitude waypoints.
•
CARP procedures show the “ESC01” waypoint in the TO field. It is not allowed to define a CARP procedure
on the RTE 2/2 page. Pressing this key with the CARP procedure “ESC01” waypoint ID displayed and an
empty scratchpad brings “CRP01” in the scratchpad.
RTE 1 [6L]:
Access to RTE 1 1/X page
RTE 2 [6L]:
Access to RTE 2 1/X page
CANCEL [6L]:
{If ERASE MODS is configured as CONFIRM} Cancel the changes made to the inactive route.
ERASE [6L]:
Displayed only when a route modification is in progress. Pressing ERASE (LSK 6L) will undo all
changes to the route and return to the ACT Route status. If confirm erase route modifications is configured, then
upon pressing ERASE a confirmation is requested by displaying CANCEL/CONFIRM prompts on line select
keys 6L and 6R respectively.
RESTORE [6L]:
Displayed (in amber) only when the route's origin is deleted in RTE 1/X page. Used to restore
the active route.
ACTIVATE [6R]:
Displayed only when route is not active. Key pressed will cause the EXEC key to illuminate.
OFFSET [6R]:
Displayed only when in flight or en-route. To initiate offset (parallel track) navigation enter
lateral offset (L99.9-R99.9) and press [EXEC]. Maximum desired lateral offset distance left or right of course is
99.9 nm. Entry is allowed only in flight if the path to the active waypoint is a track to fix leg or a Direct-To; and
not part of an approach procedure; and not terminated by an outbound leg of type Search or Hold; and not part
of an active CARP procedure. Entry of 0 or performing a [CLR] key will cancel the offset. The default OFFSET
display when an offset has not been entered or after a cancellation will be R0.0.
CONFIRM [6R]:
{If ERASE MODS is configured as CONFIRM} Confirm the changes made to the inactive route.
(SAVE?):
Displayed between the CANCEL/CONFIRM prompts when the inactive route is in modification.
This page is printed under user's responsibility
and must not be retained for reference
