manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 370 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 370

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 

Page 13-42 

November 19, 2009 

 

DESENS (3L)/(3R):

 Display/control current desensitization mode state ON or OFF. When the VUHF STAT 

CTRL is configured to ENABLE, the GUARD ANT function option is displayed in large font white color with a 
caret in large font green color pointing inward; otherwise it is displayed in small font white color for the left and 
right side respectively. 
 

TX BLNKNG (4L)/4R): 

Display/control current transmitted blanking mode state ON or OFF. When the VUHF 

STAT CTRL is configured to ENABLE, the GUARD ANT function option is displayed in large font white color 
with a caret in large font green color pointing inward; otherwise it is displayed in small font white color for the left 
and right side respectively. 
 

CP, CBIT, M CODE [5L]/[5R]:

 The control panel prompt and status is only displayed if the control panel status 

received from the VUF radio is "ON", otherwise the field is blanked. "CP" is displayed in small font green color 
for the left and right side respectively. 
The continuous bit "CBIT" prompt and status is only displayed if CBIT failures occur and are reported by the 
radio, otherwise the field is blanked. "CBIT" is displayed in small font green color and CBIT error codes is 
displayed in small font white color for the left and right side respectively. 
The maintenance code prompt "M CODE" and status is only displayed if failures occur and are reported by the 
radio, otherwise the field is blanked.  "M CODE" is displayed in small font green color and "M CODE" error 
codes is displayed in small font white color for the left and right side respectively. 
 

RADIO [6L]: 

Access to the RADIO top level page where the VUF radio is located. 

 
 

COMMUNICATION RADIOS (VUF RADIO Page 1/3) – for SRT-651/N-F  V/UHF radio 

 
This page allows the pilot to control the operation of the SRT-651/N-F VUHF radio. 
 
Display the first VUHF 1/3 page from the horizontal configuration by pressing [RADIO], <VUHF> (when the VUF 
radio is installed on the first RADIO top page) or [RADIO], [NEXT], <VUHF> (When the VUF radio is installed on 
the second RADIO top page) or [RADIO], [RADIO], <VUHF> (When the VUF radio is installed on the second 
RADIO top page and the "NEXT Keys" is set to "Yes" in the "DISPLAY CONFIG" maintenance page). 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1 R

2 R

3 R

4 R

5 R

6 R

          VUHF      1/3  

 

V U H F  

     

 

Ú

118.400 

0 4

             

  1 2 5 . 1 5 0  

0 5

 

 

 

>

TUNE GUARD

    

  M O D E  

           

  

           

         

>

AM          

       

     

 

R X   M O D E  

   

 

          

>

TR_G        

       

        

            

 

           

>

TUNE 243

   

 

 

     

  

 

 

<

RADIO          LIBRARY

>

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments