OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-40
November 19, 2009
6. Move the waypoint identifier to the TO WPT field by pressing LSK 1L.
"ACT" status on the title line is replaced by "MOD". The direct course and distance from aircraft present
position to the TO waypoint is displayed.
7. Verify the inbound course and distance of the leg to the TO WPT.
Information on any other page can be verified prior to making the tactical direct-to leg active.
8. Make the tactical direct-to leg active by pressing [EXEC].
B. TACTICAL DIRECT-TO A WAYPOINT IN THE INACTIVE ROUTE
1. Display the INACT DES+SAR OR TACTICAL 2/2 page by pressing [INIT REF], <DES+SAR> or
<TACTICAL> , [NEXT].
2. Enter the waypoint identifier in the REF ID field.
3. Press <TACT DTO> (LSK 5R).
4. The waypoint identifier followed by the “/T” qualifier is displayed in the scratchpad and the RTE x LEGS
1/X page is displayed.
5. Move the waypoint identifier to the TO WPT field by pressing LSK 1L.
6. Verify the inbound course and distance of the leg to the TO WPT.
Information on any other page can be verified prior to making the tactical direct-to leg active.
7. Insert the tactical direct-to leg in the inactive route by pressing <CONFIRM>.
This page is printed under user's responsibility
and must not be retained for reference