OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-184
November 19, 2009
C. When deletion of waypoint PLB02 has been confirmed.
ID/AGE/BRG/DIS[1L-4L], [1R-4R]:
Displays the SARSAT waypoint ident, age of last message reception in
minutes and bearing/distance relative to the REF ID. Bearing/distance field is displayed only when a valid
beacon position is available. When the ident is displayed in reverse video green it means that the SARSAT
waypoint is selected (on SARSAT DATA X/X page) for transmission to the EFIS. Entering DELETE on a
SARSAT waypoint will bring up CANCEL/CONFIRM prompts for the deletion of the selected SARSAT waypoint.
The waypoint selected for deletion will be displayed in reverse video white. Selection of the LSK will display the
corresponding SARSAT DATA page.
REF ID [5R]:
Entry of any waypoint identifier from the navigation database, the custom database, the user
database, the temporary waypoints list, the Bulls Eye waypoints, the active route or the inactive route. In the
case of multiple waypoints with the same ID, the SELECT WPT page is displayed for selection. The first time
this page is accessed after a cold start, the reference waypoint is set to the present position. Entering delete will
return to PPOS.
DISPLAY[6L]:
Toggle options: SELECTION/ALL. When “SELECTION” is chosen, the selected SARSAT
waypoints (displayed in reverse video green) are transmitted to the EFIS. When ALL is selected, all SARSAT
waypoints are transmitted to the EFIS. The selection (SELECTION or ALL) is kept in memory during a power
down. Upon a cold start on ground, the transmit option is default to SELECTION. This field is blank when the
SARSAT transmission is set to OFF on the EFIS 1/1 page. This field is only displayed when one of the following
EFIS is configured: SPERRY, SPERRY2, GAMA, SEXTANT, ROCKWELL, ROCKWELL2, ROCKWELL3,
BARCO, AHCAS2, MEGGIT or Primus Epic, otherwise, this field is blank.
CANCEL [6L]:
Cancels the deletion of a SARSAT waypoint or all SARSAT waypoints as applicable.
DELETE ALL [6R]:
Request to delete all SARSAT waypoints and triggers the CANCEL/CONFIRM prompts.
When this prompt is pressed, all SARSAT waypoints will be displayed in reverse video white. If no SARSAT
waypoint is available this prompt is not displayed.
CONFIRM [6R]:
Confirms the deletion of a SARSAT waypoint or all SARSAT waypoints as applicable.
(DELETE?):
Displayed between the CANCEL/CONFIRM prompts upon deletion of SARSAT waypoint(s).
1 R
2 R
3 R
4 R
5 R
6 R
SARSAT WPT 1/2
I D / A G E / B R G / D I S
<
E L T 0 1
( * * ) ( 1 8 ) E L T 0 5
>
0 9 0
T
/ 2 0 . 0
N M
1 9 0
T
/ 1 0 . 0
N M
<
E P I 0 3
( 0 0 ) ( 0 5 )
P L B 0 7
>
0 0 0
T
/ 2 5 . 1
N M
0 1 1
T
/ 2 0 . 5
N M
<
E L T 0 4
( 0 2 ) ( 1 0 )
P L B 0 8
>
3 5 2
T
/ 8 0 . 5
N M
1 8 0
T
/ 4 0 . 0
N M
<
E L T 0 5 ( 1 8 )
1 9 0
T
/ 1 0 . 0
N M
R E F I D
P P O S
D I S P L A Y
>
A L L
D E L E T E A L L
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference