OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page 13-64
Revision 2 March 01, 2010
This page is displayed as follows once the SMS text message has been edited and is ready to be transmitted
(READY TO TRANSMIT mode):
NOTE: The message to be transmitted can only contain a maximum of 160 alphanumeric characters.
[1L], [2L], [3L]:
When operating in EDIT mode, if the scratchpad is empty, pressing these softkeys will transfer
the entire text line from the line directly associated with the softkey to the scratchpad. If the scratchpad contains
any text, then the system will copy that text into the line directly associated with the softkey and place the cursor
at the end of this line. In overwrite mode, the text at this line is replaced by the scratchpad text. In insert mode,
the scratchpad text is inserted on this line and the text below this line is pushed down one line.
[1R], [2R], [3R]:
When operating in EDIT mode, if the scratchpad is empty, pressing these softkeys will transfer
the entire text line from the line just below the softkey to the scratchpad. If the scratchpad contains any text,
then the system will copy that text into the line just below the softkey and place the cursor at the end of this line.
In overwrite mode, the text at this line is replaced by the scratchpad text. In insert mode, the scratchpad text is
inserted on this line and the text below this line is pushed down one line.
[1R] [3R]:
When operating in EDIT mode and when the message text contains more than 6 lines up and down
cursors appear at position 1R and 3R to allow scrolling window movement. The 1R prompt will move the window
one line up and the 3R prompt will move the window one line down.
MODE [4L]:
Toggle between EDIT and READY TO TX. The default value when coming from the SEND SMS
1/3 page via the LSK WRITE TXT is EDIT. When operating in EDIT mode, pressing this key exit the EDIT mode
and goes to READY TO TX mode.
INSERT [4R]:
When operating in EDIT mode, pressing this key controls the text entry mode by toggling
between INSERT and OVERWRITE entry mode.
NOTE: When OVERWRITE mode is selected, the cursor is displayed in inverse green video.
SPARE CHAR= (4R):
When operating in EDIT mode, this field displays the number of spare characters
available.
For the Iridium phone: The maximum number of spare characters is 160.
For the GSM phone:
in S/W 300: The maximum number of spare characters is 160.
in S/W 300V and higher: The maximum number of spare characters is 66.
1 R
2 R
3 R
4 R
5 R
6 R
PHONE: SEND SMS 2/3
- E N T E R M E S S A G E B E L O W -
RESCUE RESEARCH
SUCCESSFUL. 3 INJURED
PEOPLE FOUND. PREPARE
AMBULANCE WHEN HELICO
BACK TO BASE.
>
M O D E
S A V E S M S
<
R E A D Y T O T X R E A D Y
T O :
C H A N G E #
>
P E T E R / 5 1 4 7 4 8 3 0 0 0
<
PHONE TOP
T R A N S M I T
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference
