manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 766 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 766

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 

Page E-16 

 

November 19, 2009 

SYSTEM ALERT 
MESSAGE 

DESCRIPTION ACTION 

APPLICABLE 
CONFIGURA-TION 

SET QNH

 (cont’d)

  

If the IS&S EFIS is installed: 
If this message has been 
triggered as a result of being 
within a 30 nm distance from the 
destination airport while below 
the transition level (TRANS LVL) 
specified on the PLAN DATA 
page, then this message is reset 
if barometric pressure reference 
is selected by the crew and 
barometric corrected altitude is 
available. 
 
If the IS&S EFIS is installed: 
If this message has been 
triggered as a result of being at 
least 33 nm away from the origin 
airport, and, is above the 
transition altitude (TRANS ALT)  
specified on the PLAN DATA 
page, then this message is  
reset if standard pressure 
reference is selected by the 
crew. 

 

If the message is 
configured, and the FMS is 
in terminal and approach 
operations 

SET QNH 

(cont’d)

 

 
 
 

NOTE:  For ROTOR aircraft, 
airport terminal areas are only 
detected around navigation 
database airports

. 

 

If the message is 
configured, and the FMS is 
in terminal and approach 
operations 

TACAN NAV LOST 

No TACAN sensor data is 
available for the onside and 
offside FMSs. 
TACAN navigation mode is no 
longer available. 
If FMS was in TACAN navigation 
mode, it automatically reverts to 
the next available navigation 
mode. 

Ensure that identified TACAN 
receiver is powered.   
Verify if TACAN receiver 
operates normally. 
Advise maintenance. 

TACAN interface 

TACT APPR DB 
INVALID 

The FMS detects a tactical 
approach database corruption. 

Tactical approach already 
loaded in the flight plan is 
still considered valid and can 
be used but attempt to re-
select a tactical approach 
from the 
database is prohibited. 
 
Advise maintenance. 

Tactical Approach 
configured 
 

TDN FUNCTION 
LOST 

The FMS has detected a failure 
of all configured onside and 
offside Radio Altimeters. As a 
result, the TDN functionality has 
been lost. 

Ensure that Radio Altimeter is 
powered.  
Verify if Radio Altimeter 
operates normally. 
Advise maintenance. 

•

 Hover function 

•

  Radar Altimeter interface 

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments