OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-73
November 19, 2009
ERASE [6L]:
Used to erase all route modifications in progress including HOLD definition. The prompt is not
available for inactive route modifications. If confirm erase route modifications is configured, then upon pressing
ERASE a confirmation is requested by displaying CANCEL and CONFIRM prompts on line select keys 6L and
6R respectively.
SPD/TGT ALT [1R]:
Displays speed/altitude restrictions for corresponding waypoint on the RTE LEGS 1/X
page. Altitude display can be in feet or FL. If waypoint is before the midway point of the active route, Transition
Altitude is used. If waypoint is after the midway point of the active route, Transition Level is used.
The speed/altitude constraints extracted from the navigation database is displayed in small font. Manual entry
of speed/altitude constraints is displayed in large font. Refer to field
ALTITUDE CONSTRAINTS
on RTE LEGS
1/X page for the manual entry format.
If the FMS is configured for VNAV, approach and approach transition waypoint altitude constraints are
temperature-compensated, provided that destination airport temperature was entered on the VNAV page.
Temperature-compensated altitude constraint is displayed in reverse video white.
FIX ETA (2R):
Estimated time of arrival over holding fix.
STATUS [5R]:
Indicates the status of the holding pattern.
•
INACTIVE: The holding pattern is part of the inactive flight plan or active flight plan but not yet reached the
active TO waypoint.
•
ARMED: The active TO waypoint is in the holding pattern, but not yet reached.
•
IN PROGRESS: The aircraft has entered the holding pattern.
•
EXITING HOLD: The holding pattern is in progress and the "EXIT HOLD>" prompt has been pressed.
•
EXIT ARMED: The aircraft is exiting the holding pattern, the "EXIT HOLD>" prompt and the EXEC key have
been pressed.
•
RESUMING HOLD: The exit is armed and the "RESUME HOLD>" prompt has been pressed.
EXIT HOLD [6R]:
Active only when the displayed holding pattern status is IN PROGRESS. Pressing this LSK
causes EXITING HOLD prompt to appear, the route goes in MOD status and the EXEC lamp illuminates. If the
EXEC key is pressed in the EXITING HOLD state, the holding pattern exit is armed
RESUME HOLD [6R]:
Displayed when the holding pattern status is EXIT ARMED. Pressing this LSK changes
the status to RESUMING HOLD and causes the route to be in MOD and the EXEC lamp to illuminate. If the
EXEC key is pressed in the RESUMING HOLD state, the holding pattern is resumed and the exit type is
manual.
CONFIRM [6R]:
{If ERASE MODS is configured as CONFIRM} Confirm the changes made to the inactive route.
(SAVE?):
Displayed between the CANCEL/CONFIRM prompts when the inactive route is in modification.
This page is printed under user's responsibility
and must not be retained for reference