manualshive.com logo in svg

Esterline CMA-9000, Operator'S Manual, Page: 228 / 802

Share
Download
Esterline CMA-9000 Operator'S Manual Download Page 228

 OPERATOR’S 

MANUAL 

 

CMA-9000 FLIGHT MANAGEMENT SYSTEM 

 
 

 

 Page 

11-26 

 

November 19, 2009 

 

6.  After confirming, the moving waypoint is saved in the user database and can be viewed in the user 

waypoint list (user waypoints are displayed in alphabetical order on the USER WPT LIST 1/1 page). 
Access the USER WPT LIST 1/1 page by pressing [INIT REF], <WPT LISTS> (LSK 2R), and <USER 
WPT> (LSK 1L). The moving waypoints are identified by displaying the symbol MOV in reverse video 
besides and underneath the waypoint identifier. The distance from the present position to the user 
waypoints is also displayed in the USER WPT LIST 1/X page. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

7.  Any user waypoint (fixed or moving) can be visualized and modified by pressing the corresponding LSK 

on the USER WPT LIST 1/X page. The WPT DATA 1/1 page will be displayed and changes can be 
performed on the parameters. If a moving waypoint which is present in the active route is displayed then 
“ACT RTE” field at LSK 3R is displayed in reverse video. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

NOTE:  The distance is displayed with “***” when the distance is above 500 nm. 

1 R

2 R

3 R

4 R

5 R

6 R

     USER WPT LIST   1/2

            D I S   N M             D I S   N M

<

ADFF 

 

2 0 . 1  

 

GABRE

 

0 . 7 9

>

       

MOV 

<

BINDY

 

2 8 . 9

  

HEC

   

8 2 . 7

>

 

<

CIVET

 

3 6 . 3

  

INTC

  

3 2 . 6

>

                   

MOV  

<

DAG

   

8 1 . 6

  

LAHAB

 

2 4 . 1

>

 

<

DOWNE

 

2 1 . 5

  

LAX16

 

2 3 . 8

>

                   

MOV  

<

NEW USER WPT   

DEL ALL

>

 

1 L

2 L

3 L

4 L

5 L

6 L

1 R

2 R

3 R

4 R

5 R

6 R

       WPT DATA     1/1 

ADFF     

M O V I N G

 

W P T   P O S

 

     N45

o

12.23 043

o

32.12 

        B R G / D I S  

134

T

/123

N M

   

 

      D A T A B A S E  

U S E R  

A C T   R T E

          T R K / G S  

111

T

/ 23

K T

 

 

 

 

 

 

<

EDT/NEW WPT  

   

DES+SAR

>

 

1 L

2 L

3 L

4 L

5 L

6 L

This page is printed under user's responsibility

 

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments