OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
11-91
November 19, 2009
E This page is displayed when the flight plan transfer from the ATOS failed.
NOTE: The 'z' displayed in the TARGET lines are only displayed if the time reference of the FMS is set to UTC.
The FMS will then store the received mission waypoints from the ATOS in its inactive route.
Upon successful mission data transfer from the ATOS, the FMS will create, in the inactive route, origin and
destination airports with the following priority:
•
the FMS will use the origin and destination airports currently in the active route (if any are defined), or,
•
the FMS will create an origin airport named "ORIG" with the coordinates of the first mission data waypoint
received from the ATOS and a destination airport named "DEST" with the coordinates of the last mission data
waypoint received from the ATOS.
When the ATOS is configured, the FMS continuously transmits its active flight plan waypoints (up to a maximum
of 81) to the ATOS equipment.
1 R
2 R
3 R
4 R
5 R
6 R
MISSION 1/1
R A D A R T A R G E T
1 3 1 5 : 1 0
z
N 4 5
°
3 4 . 2 5 W 1 2 2
°
4 5 . 1 2
A T O S T A R G E T
1 3 1 9 : 2 0
z
N 4 3
°
5 6 . 7 8 W 0 9 5
°
1 7 . 6 6
A T O S T R A N S F E R S T A T U S
F A I L E D
<
RADAR ID X-REF
<
NEW USER WPT DES+SAR
>
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference