Esterline CMA-9000 Page 785 Operator'S Manual Download

Page: 785 / 802

OPERATOR’S

MANUAL

CMA-9000 FLIGHT MANAGEMENT SYSTEM

Page E-35

November 19, 2009

STATUS
ADVISORY
MESSAGE

DESCRIPTION ACTION

APPLICABLE
CONFIGURA-TION

PASSWORD
CHANGED

The library password has been
successfully changed.

N/A

One of following radio is
configured COM
VUHF
VOR/ILS
ADF

RED LIGHT

The FMS detects the XTE (Red
Light) CARP waypoint has been
reached.
Message is enabled when the
CARP function is configured.

Stop CARP drop.

Configurations supporting
CARP/HARP

RENDEZVOUS
UNACHIEVABLE

The interception of the moving
waypoint is not possible (greater
than500 nm).

NOTE: This message is
generated when the moving
waypoint is not the active
waypoint.

Take appropriate measures to
meet the moving waypoint.

Moving waypoint

SLOWDOWN

The FMS detects the slowdown
waypoint for CARP has been
reached.
Message is enabled when the
CARP function is configured.

CARP Slowdown waypoint
has been reached.

Configurations supporting
CARP/HARP

SMS NOT
TRANSMITTED

The FMS detects that SMS was
not transmitted by the Iridium
phone.

Retry to send the SMS.

Iridium Phone interface.

SMS
TRANSMITTED OK

The FMS detects that SMS was
transmitted by the Iridium phone.

Advisory

Iridium Phone interface.

TARGET XFER
FAILED

The FMS detects a target
waypoint transmission from the
ATOS LW or FIAR 1500B Radar
for which the position received is
out of range.

The crew should retransmit
the target position. If the
problem persists the interface
between FMS and the
transmitting equipment should
be checked.

Installations in which the
FIAR 1500B Radar and/or
ATOS equipment is/are
configured.

TEARDROP HOLD
ENTRY

The FMS detects holding pattern
entry procedure to be used at
crossing of holding fix.

Acknowledge the holding
pattern entry.

All configurations

TEMP POS
UPDATE END

The FMS detects the termination
of an active temporary position
update.

None.

Configurations supporting
CARP/HARP

This page is printed under user's responsibility

and must not be retained for reference

Summary of Contents for CMA-9000



































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CMA-9000

Reviews:

Related manuals for CMA-9000

Brands by name

Popular brands

Esterline CMA-9000, Operator'S Manual

Search results

Summary of Contents for CMA-9000

Reviews:

Related manuals for CMA-9000

Brands by name

Popular brands