OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-125
November 19, 2009
ETA (2R):
Display Estimated Time of Arrival (ETA) at waypoint.
NOTE: When the aircraft is on ground, the ETE (estimated time en route) to the waypoint is displayed instead of
the ETA if the PLAN DATA page is configured. If they are not configured, the field is blank.
ETE (2R):
Display Estimated Time En-route (ETE) to waypoint (displayed only on ground).
NOTE: When the aircraft is on ground, the ETE to the waypoint is displayed instead of the ETA if the PLAN DATA
page is configured. If it is not configured, the field is blank.
NEXT (3L):
Identifier of NEXT waypoint. Special attributes are displayed in inverse video white (refer to NOTE
2).
NOTE: If SAR waypoint ident displayed (e.g. 01 - 79), then the ident will not be transferred to the scratchpad.
DEST (4L):
Identifier of the destination airport/waypoint.
RNP/ANP [5L]:
Used for entry and/or display of the Required Navigation Performance (RNP) for the phase of
flight and displays Actual Navigation Performance (ANP). RNP is defined as a statement of the navigation
performance necessary for operation within a defined airspace (adapted from ICAO definitions). RNP includes
requirements for accuracy, integrity, continuity and availability of navigation signals and equipment. The Actual
Navigation Performance field displays one of the following (depending on the navigation mode): GPS ANP, INS
quality factor, or dead reckoning quality factor. Refer to Section 15, RNP Capability for additional information.
HSI SCALE [5R] or (5R):
Entry and display of HSI full scale deviation (in nautical miles). Entry is only allowed
during the en-route phase of flight. Either 1 nm or 5 nm can be entered as the HSI scale. {Displayed only if EFIS
is configured and not configured for en-route navigation}. If VNAV option is configured the title becomes “
HSI
SCALES
” and an additional field for full scale value of vertical deviation (in ft) is displayed.
NAV MODE [6L]:
Current sensor used for navigation. Pressing LSK 6L will access the POS REF 2/X page.
Possible navigation modes:
•
INS/GPS{if EGI installed}
•
cGPS {if dual GPS installed}
•
mGPS {if dual GPS installed}
•
GPS {if EGI only or CIVIL GPS only configured}
•
DME
•
VOR/DME
•
INS/DVS
•
INERTIAL
•
DVS
•
KALMAN {if APIRS installed}
•
DR
MISSED APPR [6R]:
Not Shown.
If the prompt display is configured, prompt appears during final GPS
instrument approach with no route modification in progress. Pressing this key will automatically sequence the
Missed Approach Point (MAP) to the missed approach procedure. The function of this key is limited to the FMS,
and has no impact on any missed approach or take-off/go-around mode of the flight guidance system.
This page is printed under user's responsibility
and must not be retained for reference