OPERATOR’S
MANUAL
CMA-9000 FLIGHT MANAGEMENT SYSTEM
Page
A-134
November 19, 2009
C. When SAR part of the active route:
D. When a HOVER procedure is part of the active route:
FROM (1L):
Identifier of the last (FROM) waypoint overflown. Displays "GROUND" after takeoff before reaching
the active waypoint. Special attributes are displayed in inverse video white (refer to NOTE 1).
NOTE: If SAR waypoint ident displayed (e.g. 01 - 79), then the ident will not be transferred to the scratchpad.
ALT (1L):
Crossing altitude over the FROM waypoint. Display can be either in feet or FL. If waypoint is before
the midway point of the active route, Transition Altitude criterion is used. If waypoint is after the midway point of
the active route, Transition Level criterion is used.
ATA (1R):
Actual time of arrival at the FROM waypoint.
TO (2L):
Identifier of active TO waypoint. Special attributes are displayed in inverse video white (refer to NOTE
1).
NOTE: If SAR waypoint ident displayed (e.g. 01 - 79), then the ident will not be transferred to the scratchpad.
1 R
2 R
3 R
4 R
5 R
6 R
ACT PROGRESS 2/4
F R O M A L T A T A
SEA
5 0 0
F T
1 8 0 3 . 1
Z
T O D T G
N M
E T A
WPT02
/ O
T D N
7 . 2 5 0 0 + 0 2 . 9
<
N E X T
W P T 0 1 / O
M R K
9 . 7 5 0 0 + 0 3 . 5
D E S T
DEST
9 . 7 5 0 0 + 0 3 . 5
1 L
2 L
3 L
4 L
5 L
6 L
1 R
2 R
3 R
4 R
5 R
6 R
ACT PROGRESS 2/4
F R O M A L T
A T A
DIRECT
5 0 0
F T
1 8 0 3 . 1
Z
T O D T G
N M
E T E
SAL
/ S 1 7 . 2 0 0 + 1 7 . 9
<
N E X T
01
SAR
6 8 . 7
0 0 + 3 0 . 5
D E S T
KLAX
1 2 7 9 0 5 + 4 7 . 2
1 L
2 L
3 L
4 L
5 L
6 L
This page is printed under user's responsibility
and must not be retained for reference