Ericsson AVP 4000 Reference Manual Download Page 97

Page: 97 / 422

Getting Started

1/1553-FGC 101 1790 Uen Y

3-61

3.7.25

Automatic Video Input Detection and Configuration

The AVP 4000 is capable of automatically detecting the format of the video and

automatically configuring the encode to match. The AVP 4000 can be configured to

detect between HD input standards only or between SD and HD input standards.

3.7.25.1

Selection of Automatic Video Input Detection and Configuration

3.7.25.1.1

Encode

Set up an encoding service as documented in section

3.7.6 How to Configure the

Chassis for Multi-screen Functionality

. On the

Service Configuration > Outputs >

> Video

component

select the

Input

tab on the

Properties

widget. The

parameter

Input Detectio

n is presented with five options:

Off

HD 25/50Hz

29.97/59.94Hz, SD/HD 25/50Hz

SD/HD 29.97/59.94Hz

Selecting the

Off

option allows you to explicitly set the

Video Input Format

. When

Off

option is selected, auto detection is disabled and the user must select the valid

Video Input Format

manually.

Figure 3.50 Encoding: Manual Input Format

HD 25/50Hz

is selected, the AVP 4000 will automatically select an HD vertical

resolution based on the incoming video. The

Detected Video Standard

gives

feedback to the user on what vertical resolution has been detected by the

AVP 4000. If the detected standard is an HD format with a frame rate of either 25Hz

or 50Hz, the

Video Input Format

is automatically set to that detected standard.

The same applies for HD 29.97/59.94Hz.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 97 / 422

Search results

Summary of Contents for AVP 4000

Reviews: