Ericsson AVP 4000 Reference Manual Download Page 260

Page: 260 / 422

Web GUI Control

5-76

1/1553-FGC 101 1790

Uen

5.5.4.1.1

General Transport Stream Settings

The general Transport Stream parameters are available in the

Properties

widget on

the

Service Configuration

page if a Transport Stream is selected in the

Outputs

widget. The same settings are also available through the front panel under

Output/<interface name>/<Transport Stream name>

Table 5.59 General Transport Stream Settings

Parameter

Values

Description

Status of Service

Online, Offline, Preview, Retire

Determines the output (Setmode) state of the Transport

Stream.

Bit rate

0.01 to 216 Mbps

Bit rate of the emission transport stream.

Reserved Bit rate

-216 to +216 Mbps

Reserve bit rate in the transport stream that will not be

consumed by services or components.

Auto Enable

True; False

Automatically resume emission of the TS if the event

causing automatic disable has cleared.

Auto Disable

Never; Audio Lost; Video Lost; Audio or Video

Lost; Any CRITICAL alarm

Automatically stop emission of the TS in the event of the

selected event.

Syntax

ATSC; DVB

Which syntax to be used in the TS, descriptors and

tables.

External Generation

Off

External generation of PSI tables, ATSC only.

Program Specific Information

Transport Stream ID

1 to 65535

ID of the transport stream as it appears in the NIT.

PAT/PMT

On; Off

Generate PAT and PMT if selected.

CAT

Off; On

Conditional Access Table generation.

TSTD

Off; On

Generation of the TSTD table. Selection only available

for DVB syntax.

PAT/PMT Parameters

PMT Repetition Period

100; 400; 500 milliseconds

How often to transmit the PMT

Dolby Digital Descriptor

DVB; ATSC; DVB & ATSC

Format of the Dolby Digital Descriptor in the PMT, if

present. Selection only available for DVB syntax.

Service Information

Original Network ID

1 to 65535

ID of the originating network. Selection only available for

DVB syntax.

NIT

Off; On

Network Identification Table. Selection only available for

DVB syntax.

TDT

Off; On

Time and Date Table. Selection only available for DVB

syntax.

EIT

Off; On

Event Information Table generation. Selection only

available for DVB syntax.

SDT

Off; On

Service Description Table.

NIT Parameters

Network Name

string

Free field string for the Network name to be sent in the

NIT.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 260 / 422

Search results

Summary of Contents for AVP 4000

Reviews: