Ericsson AVP 4000 Reference Manual Download Page 101

Page: 101 / 422

Getting Started

1/1553-FGC 101 1790 Uen Y

3-65

Figure 3.55 Closed Captions Selection

3.7.26

How to Set Up BISS Encryption for Services

When the AVP/SWO/BISS license is enabled as part of the AVP/SWO/MEZZ/BASIC

package, the encoder uses Basic Interoperable Scrambling System (BISS) to

scramble services in the outgoing Transport Stream. Both BISS Mode-1 and BISS

Mode-E are supported.

3.7.26.1

BISS Security

To provide the option of additional security for the BISS encrypted stream, there are

two security levels available: normal BISS encryption (the original implementation)

and Advanced BISS encryption (new, higher security). By default, normal BISS

Encryption security level is enabled.

If the higher security level is required this can be configured from the GUI by

browsing to

Device Configuration > Advanced Setup > Base Unit

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 101 / 422

Search results

Summary of Contents for AVP 4000

Reviews: