Ericsson AVP 4000 Reference Manual Download Page 199

Page: 199 / 422

Web GUI Control

1/1553-FGC 101 1790

Uen

5-15

5.3.1.2

Configuration Workbench Widget

The

Configuration Workbench

widget displays the information about the slot

selected in the

Stored Configurations

widget. Moreover, it lets the user overwrite,

restore, delete or export the configuration in the selected slot.

Figure 5.15 Configuration Workbench Widget

Note:

The format of the files exported through the

Stored Configurations

page is

not compatible with the format of the configurations saved on the

Support

page.

5.3.2

Using the Stored Configuration Page

This section describes the tasks that can be completed on the Stored Configuration

Page.

5.3.2.1

Storing the Current Configuration

The unit provides 64 configuration slots for storing different configurations.

Configurations can be saved at any time. To save the current configuration, do the

following:
1. In the

Stored Configurations

widget, select the slot you want to use for storing

the configuration. If the slot is not empty, it will be overwritten.

2. In the

Name

field in the

Configuration Workbench

widget, enter a name for the

configuration.

3. You can also add a description in the

Description

field if you wish. The

description can help identifying the configuration in the future.

4. Click on the

Save Config

button within the

Configuration Workbench

widget.

5. A confirmation dialog will appear. Choose

Yes

to save the configuration in the

selected slot.

Once stored the configuration is available to be recalled and used at any time. The

table below describes each main action associated with the stored configurations.

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 199 / 422

Search results

Summary of Contents for AVP 4000

Reviews: