Ericsson AVP 4000 Reference Manual Download Page 302

Page: 302 / 422

Advanced Video Processing and Networking

6-28

1/1553-FGC 101 1790 Uen Y

Figure 6.13 Audio Components Tab

6.14.2

Configuring Thresholds for PID Monitoring

The PID monitor checks for both continuity count errors and for missing PIDs, for the

PIDs on which it has been enabled. Both conditions have parameters which may be

adjusted for different levels of error tolerance in the environment in which the AVP

4000 has been deployed.

The parameters are common to all PIDs being monitored. They may be found by

navigating in the web GUI to

Service Configuration > Outputs > IP or ASI >

Transport Stream > Service

, and viewing the

Properties

of that selected Service,

as shown in

Figure 6.14

Summary of Contents for AVP 4000







































































































































































































































































































































































































































Search results

Summary of Contents for AVP 4000

Reviews:

Ericsson AVP 4000, Reference Manual, Page: 302 / 422

Search results

Summary of Contents for AVP 4000

Reviews: